DIY Wall Art

Steffi Wood
by Steffi Wood
2 Materials
$30
4 Hours
Medium

So, I found this DIY wall art from a girl I follow on Instagram and fell in love with it! It’s not too difficult to make either if you have the right tools!


Tools you need:



  1. Miter Saw
  2. Skill Saw or a Table Saw
  3. Clamps
  4. Nail Gun




Materials:




  1. Seven Common Pine Boards that are 1x2’s
  2. A 2x4 underlayment


When you buy the pine boards and the underlayment be sure to buy ones that don’t have knots or are really discolored. You want them to be more plain looking to get the look we are going for!




First you cut the pieces where you want them. Each edge was cut at a 45 degree angle and some obviously was just a straight edge. Then we spaced out the pieces with remnants of wood that were a 1/2 inch. We glued the pieces down to the underlayment first and then used a nail gun to keep them secure. Make sure the nails are less than 1 and 1/4 inch so they don’t go through your board. Then you trim around the edge and then use more 1x2 to trim it out. Hopefully the pictures will help!






Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
  1 question
  • Carolina's Art Carolina's Art on Nov 30, 2019

    Beautiful!! are you going to leave it as is or are you going to add stain colors? where are you going to hang it? would like a picture after you hang it.

    It really turned out gorgeous. Modern and creative.

Comments
Join the conversation
3 of 28 comments
Next