How to Imitate Marble With Paint | Faux Marble Technique

Zoe Hunt
by Zoe Hunt
7 Materials
$50
3 Hours
Easy

Disclosure: I received paint from Sherwin-Williams as compensation for the post. All views and opinions expressed in the post are my own and no other compensation was provided.

BEFORE
Gather your supplies


When we were designing our powder room, everything revolved around the marble wall. Sure, I would've loved to fly in a beautiful slab of marble from Italy, but no one has the time or budget for that! So instead of a real slab of marble, I would determined to create the look using just paint. Spoiler alert: it worked!


Alright, let's start DIYing!


Time Commitment: A few hours


Shopping List:


  • Paintbrush
  • Feather
  • Sea sponges
  • Spray bottle with misting setting
  • Baby wipes
  • Paint for your base
  • Paint for your veining


Paint Colors:

Background:

  • Extra White SW 7006


Veining:

  • Cityscape SW 7067
  • Gray Matters SW 7066
  • Passive SW 7064


Since this tutorial is for a marble wall, I will refer to "the wall," but rest assured, you can use this same technique on furniture, countertops, or tile as well.


P.S. Come check out of full powder room makeover, complete with 6 unique DIYs!

Prep your wall and materials


A. Paint your wall with your base color. I would recommend Extra White SW 7006 for this. It's a bright white that looks great with blues and grays. We ended up painting a total of 3 coats to make the wall look as glossy as possible. Wait for your paint to fully dry before moving onto the next step.


B. Print a picture (or sketch out a pattern) that shows what type of marbling you want to achieve. You might want a very spongy texture or heavy lines. Find a picture that speaks to you and print it out so you can look at your inspiration while painting.


C. Dampen one of your sea sponges. Squeeze out the excess water. You want to get your sea sponge damp so that it is flexible, but you don't want it to be dripping.


Tip: Begin your design in a top corner and work your way down and across, following the direction of your marble pattern. 


Choose a technique


Use one of the following techniques to create your marble effect. Each wall will be different, but we used a combination of all three. We mostly worked with a brush for this wall and then added some dark colors using the feathers. We utilized the sponge technique in two areas of our wall.

Add Veins (with one of these techniques)


Option 1: Paint veins


The first option is a brush. This is great for thicker, longer lines. Using a paint brush like the one pictures above, lightly paint a line for your marble. Don't worry about keeping it straight or consistent. Add some bumps along the way and paint with more or less pressure to add more variation.

Option 2: Sponge veins


Lightly dip your sponge in paint, then dab off all of the excess on a paper towel. A tiny bit of paint goes a long way in this technique!

Option 3: Use a feather to draw veins


Use a feather like the one pictured above. This type of feather is stiff enough to produce thin lines. If you use a feather that is too soft, it will be difficult to transfer any paint to the wall. Lightly run your feather along the wall. I liked running a slightly darker color on top of a light line that I already painted with a brush. This will give the look of variation in a single vein.

Spray water on the veins


Regardless of what technique you use, immediately spritz the wall once or twice with water after you add the gray paint. Be careful for drips! If you notice a drip, immediately wipe it off using a baby wipe.

Dab with sponge


Once you spritz the wall, gently dab the paint with a clean, damp sea sponge. This will soften the lines and help blend it. Keep dabbing until you reach your desired look.

Wipe away undesired marks


If your sponge left undesired sponge marks, you can wipe the marks using baby wipes. Use baby wipes along the way to clean up any paint that you didn't intend to be on the wall.



ļ»æKeep painting using a variety of techniques until you have achieved your desired look. I recommend working in small sections at a time, approximately 12" or less. This will ensure that your paint is still very wet and you can blend in lines with water.

Admire!


There you have it! Now you know how to create the look of marble using paint. And let me just add this. Take this as proof that paint has the power to create so much! See a wallpaper you like, but its $200/roll? Try painting it! Never underestimate the power of paint, it sure can do a lot!


Liked this idea? Check our all of our DIY accent wall tutorials!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Zoe Hunt
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  2 questions
Comments
Join the conversation
2 of 13 comments
  • Thea Thea on Mar 18, 2021

    This looks fantastic but boy, if you get it wrong it looks horrible. I lived through the bad sponge effect jobs of the 80ā€™s.šŸ˜›

  • Margi Renzoni-Sperandeo Margi Renzoni-Sperandeo on Mar 18, 2021

    One of, if not the best faux marble projects I have seen and I have seen a lot. I love the look of marble, always have.

Next