Painted Tile Floor

Sarah
by Sarah
3 Materials
$75
8 Hours
Medium
I am always amazed at what a little paint can do to transform a space. When Cutting Edge Stencils offered to send me the stencil of my choice to try, I couldn’t wait to use one of their stencils for this painted tile floor! But I had such a hard time choosing the stencil pattern as there are SO many great options. I took a poll on my Instagram account and the metro hex stencil won! It’s such a beautiful pattern and looks really great and modern so it was perfect for this small space.

Disclaimer: In the name of full transparency, please be aware that this blog post may contain affiliate links (Amazon/Cutting Edge Stencils/Home Depot) and any purchases made through such links will result in a small commission for me (at no extra cost for you). As an Amazon and Home Depot Associate I earn from qualifying purchases.



Time, Supplies, Tips for Painted Tile Floor


Length of time for project: 2-4 days to account for paint drying time, touch ups, your sanity and it’s need for a break

Cost and supplies: Next to nothing! I had the acrylic white paint and grey chalk paint on hand and  Cutting Edge Stencils provided the stencil. So all I purchased for this project was some primer and foam rollers. Estimated cost if you purchase everything new: primer, Acrylic white paint, Chalk paint ( Rustoleum Country Gray),  polycrylic top coat,  Stencil,  Foam rollers,  Spray adhesive. Approximate total painted tile floor: $100


What I learned: The  metro hex stencil is GORGEOUS!!! But it is not intended for the perfectionist. There will be mistakes. It will not be perfect. You can do touch ups until the end of time and it would still likely not be perfect. But man is it beautiful. And totally worth it. So if you can live with a little imperfection, totally get this stencil! If you can’t- try a bigger pattern.


Floor/Tile Prep


Start by cleaning the floor really well. I vacuumed and mopped and then got on my hands and knees and into the corners to make sure there was no remaining dust and debris. Once this was complete, the space was prepped with painters tape all along the edges of the baseboards, tub, toilet, and sides of the vanity. Check out a few before shots:

The tile was then primed with two coats of a white primer to help the paint adhere better. I first took a paintbrush and went along the walls and baseboard edges. I also used the paintbrush to get into the grout lines. Then I used a  small foam roller to apply a thin coat of primer to the top. Again, two coats were applied in total. (You may notice that the vanity is a different color here than the before shots. I will post about that soon!)

After the primer was completely dried, I painted the tile with white acrylic paint (on hand from previous projects). I used the same technique as above and applied an additional two coats to get nice clean and even coverage.

Stenciled Tile


Now it is time for stenciling! I’ll admit, this step made me a bit nervous. I knew it would be tough to get crisp clean lines with the stencil in every single spot, so I was prepared for touchups. My plan was to 1) use  spray adhesive, 2) reapply  spray adhesive to the back of the stencil every couple of applications, and 3) clean the stencil in between to make sure there wasn’t a ton of buildup of paint and spray adhesive. Even with these measures I couldn’t keep the lines super crisp throughout…but it wasn’t too bad.

Then I picked a corner in the far part of the room as a starting point. I applied a  gray chalk paint that I had on hand using a  small foam roller. Just make sure you get rid of any excess paint to avoid any possibility of paint leaking underneath the stencil.


Chalk paint dries super fast and I was able to remove the stencil after about 30 seconds or so. That said, I actually applied two coats of the  chalk paint  prior to removing the stencil just to be sure I got the right amount of coverage. BTW- this grey is perfect. It reminds me of the color of concrete and that is exactly what I was going for!

Then just continue the process by moving the stencil over to the side or down below and matching up the pattern along the way. For the most part, this went pretty fast. It did get tough in the tighter spaces and along the wall edges. I ended up cutting my stencil in half to make it easier for me to get into some of those tighter spaces.


Touch Ups


Once the stenciling was done, it looked pretty great! Well, it looked great from far away. When I got down on my hands and knees to look around, there were a ton of little mistakes. I don’t consider myself to be a crazy perfectionist, but I knew if I didn’t fix the majority of these that it would eventually drive me crazy. So I spent the next couple of days, on and off, down on the floor making touchups. I tried using a grout line stencil (I had received with a different stencil set) but I felt like it didn’t really help with some of the edges that weren’t super crisp. So I ended up converting to freehand which actually went a little bit faster. I would recommend using a small flat brush for the grout touchups.

One thing I found that actually works pretty well was a paint pen. I grabbed a white paint pen from my local Joanne’s fabrics and felt like it gave me a little more control in some of those tighter spots. After I touched up the majority of the white paint I also went back and did some touch ups with the gray paint. Finally, I got to a point where I could live with the minor imperfections and then it was time to seal!


Sealing/Finishing


The polyurethane goes on using the same process as the paint/primer and goes really fast! I applied 3 coats of a satin  water-based polyurethane. It actually smoothed things out for me and added a light sheen that really pulled everything together. Once the polyurethane was on I was super happy with how great everything looked!

I had quite a few paint supplies on hand so the cost for me for this project was really just the cost of the primer and a few  foam rollers. Given the transformation, I think the time I had to put in was totally worth it! It really transformed the space just using paint and I’m super happy with how it turned out. I also painted the vanity and I will do an additional post on that process very soon. This stenciled painted tile floor project may just be my favorite inexpensive DIY update to date! Check out all the incredible stencils at  Cutting Edge Stencils! I promise you will not be disappointed!

Finished side by side picture. Isn't it an incredible transformation?!

Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Sarah
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 7 questions
  • Bunny Bunny on Apr 13, 2020

    Why did you not fill in all the grout lines to make it level to the tiles? I could see the tile outlines in the second to last photos here. You did a great job and it certainly looks better than the Before photo! I have been searching every project like this on the web b/c my tan tiles look just like yours and I hate that floor in our guest bathroom... the one “everyone sees!” Going to search a little more.🙂 Enjoy your beautiful floor!

  • Debra Debra on Apr 14, 2021

    I want to know more about the vanity. Was a gel stain used? Please give details on vanity. Thanks

  • Sue Scimeca Sue Scimeca on Jan 26, 2022

    How long before it wears off, do you think.

Comments
Join the conversation
2 of 27 comments
  • Susan Antonition Susan Antonition on Jun 07, 2022

    I’ve done this for several clients but in various different prints.

    I definitely added a clear coat for protection.

    depending on the client request I used Matt or satin.

    Great longevity and durability with the clear sealer.

  • Retta Retta on Apr 10, 2023

    Fabulous jobđź‘Ť

Next