Turn a Cheap Cube Storage Shelf Into a Piece of Furniture!

4 Materials
$30
3 Hours
Medium

With this easy project you can make a cheap, boring cube storage shelf look like a modern piece of furniture.

Best wood stain!

Upgrade Ikea furniture with this highly rated wood stainer that Amazon reviewers swear by!

Measure and prepare wood


First I purchased a piece of 3/4 inch poplar plywood and used the table saw to cut it down to match the exact dimensions of the top of the cabinet. Then I used 1.5"x2" pieces of pine leftover from a previous project for the four legs. I cut them down to a height of 3" each using the miter saw. You can cut pine 2"x4"s down to the size you need for the legs. Sand the edges of the piece of poplar that will be on the top of the shelf so it does not have any sharp edges.

Stain Wood


I stained the wood pieces using a dark walnut stain. I prefer using an old dish rag or t-shirt to wipe the stain over the wood. Then I allowed the wood to dry overnight.

Trace the wood legs


I traced the wood legs in each of the four corners. Then I drew a dot where I planned to pre-drill the holes for the screws.

Drill the holes


I held the leg against the shelf and drilled a wood screw from the inside of the bottom of the cabinet into the wood leg.


Use wood glue


I used a generous amount of wood glue all over the top of the shelf. Then I placed the wood piece on top and ensured it was placed perfectly and square to match up with the edges of the shelf.

Use clamps


I used clamps to hold the wood in place while the wood glue dried. I also put in a couple of pin nails around the edges for extra security but that step is not necessary.



Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
  1 question
  • Meg Ortiz Meg Ortiz on Dec 29, 2020

    When you did the wood glue on the top- did you have any trouble with the screws heads from the shelf creating too much space between the wood and the shelf? My shelf looks just like yours except both sides have the screw heads on them, not just the bottom!

Comments
Join the conversation
2 of 33 comments
Next