How to Make a Modern House Numbers Sign

9 Materials
$30
2 Hours
Medium

We moved into our fixer upper two summers ago, and ever since I had wanted to change out the house numbers. A couple of weeks ago I finally got my chance. Follow along on my easy !


Here is a before photo of the house numbers.

Nothing was wrong with them, just kind of boring and in need of some personality and a touch of modern style – our favorite.



Let me show you how to make some modern house numbers of your own. It’s easier than you might think.

Gather your supplies:

+ House numbers (from your local hardware store or Amazon)

+ Wood stain in your desired color

+ Spray paint (if you choose to paint a different color)

+ Cedar wood board (at least 1″ thick)

+ Hand saw

Ruler or tape measure

+ Epoxy glue

+ Screwdriver

+ Level

I removed the numbers from the packaging and spray painted two coats of metallic gold spray paint.

Next I took my ruler to measure the current house numbers and to determine the width the cedar plank should be. 30″ seemed perfect for our needs.


We decided that we would add our board right over our current house numbers since they were not very thick and I liked the idea of the board sort of floating.

I decided to stain my board before cutting the wood, mostly because my husband was busy working on another project at the moment. You can do this in any order you wish.

Follow the direction on the wood stain for best results, and let dry.

Once dry, measure your board to your desired width, and mark with a pen in a straight line.


Saw over the drawn line until the board is cut.

My numbers came with screws that allow for the numbers to float off the surface, and I originally decided to go with that look, but discovered that I preferred the flushed look for this project.

If you want to go with the floating look most brands of house numbers similar to these come with a handy template to use.

Again, I wanted the flush look, but there was no way to attache them in that manner to my 1″ board, so I decided to use my trusty epoxy. It is easy to use and sets in 5 minutes.

I epoxy-ed the backs of all numbers and evenly placed them on the  board. I placed cans of spray paint and stain (what I could fid quickly) over the top of the numbers to hold them down for the five minutes, and that seemed to work well.

I gave the numbers an hour to cure, and then we screwed pilot holes in all four corners of the wood plank for easier installation and to lessen the chances of the wood splitting at the corners (if installed without pilot holes).

We screwed one screw on the top to attach to the house, and then grabbed the level.

We leveled out the plank and then screwed in the three remaining screws.


We took a Q-tip and dabbed some stain over the screws to help disguise them a little bit better.

We love that the wood will lighten up and weather over times from the elements. We can always stain it again if ever needed.


This project was easier and quicker than I expected, and I LOVE the end results. It upped our curb appeal just a touch more, don’t you think?


Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Audrey Kuether
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
4 of 12 comments
Next