Framed Medicine Cabinet

Sarah
by Sarah
3 Materials
$10
1 Hour
Easy

Wanna see the easiest way ever to update an ugly medicine cabinet?! Just add a frame, baby! A framed medicine cabinet instantly upgrades it from boring and ugly to modern and gorgeous in less than an hour for about $10. Intrigued?! I’ll show you how!

Disclaimer: In the name of full transparency, please be aware that this blog post may contain affiliate links and any purchases made through such links will result in a small commission for me (at no extra cost for you). As an Amazon and Home Depot Associate I earn from qualifying purchases.Length of time for project: 1 hourCost: $10-15What you’ll need: 2  Wooden lattice strips, 8′ in length; double stick tape or construction glue, stain or paint of choice. I used this  stain and dark wax.What I learned: You need to leave a tiny gap in between the wood pieces where they meet each other at an opening to leave clearance for the mirror doors to still open.

I purchased these wood lattice strips because they are wood (and stainable) but mainly because they are thin. For the frame you want something that is thin so the doors can still have enough clearance to open. Also it needs to be thin so you can easily glue or stick the boards on the mirror.

Before Frame

Here is a quick before frame photo to show you how much of a difference adding the frame makes!


Step 1: Measure and Cut


First, I got my measurements of each mirror. The horizontal strips were cut a bit shorter than the measurement to leave a gap so the doors have clearance to open. I taped them in place first to dry fit to be sure the mirror doors opened well.

The side strips were cut to the length of the mirror minus the width of the top and bottom pieces. These cuts were all made with a miter saw but you could also have them cut in store if you go to Home Depot.

Step 2: Paint or Stain


Second, stain or paint the wood whatever color you want before adhering them to the mirror. I did a very light sanding (mostly on any ends that were splintered) and then applied one coat of stain. A dark wax was used over the stain just to give a bit more of a rustic/vintage vibe.

Step 3: Attach the Frame


Lastly, adhere the boards to the mirror. I personally used some strong double sided adhesive strips…because I’m noncommittal and I just wanted to make sure it worked before gluing! They worked so well that I didn’t bother to remove them and replace them with glue. It might be helpful to secure the wood pieces with masking tape to allow the glue to dry, if you go that route.


That’s it and now you have a beautiful framed medicine cabinet! Just a few cuts, a little stain, and some double sided adhesive strips! The frame really updated this medicine cabinet and made it look a ton more modern! Check out this post to see how I updated the rest of the bathroom!

Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Sarah
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
6 of 9 comments
  • Debie Debie on Jun 02, 2020

    OMG!!! I have been waiting to do this project; just didn’t know how but now thanks to you I can proceed. Thank you.

  • 17335038 17335038 on Jun 12, 2020

    Without a knob on the corner of the glass for your fingers to open and close door, I am wondering how long the double sided tape is going to be able to keep the strips adhered......... .

    • See 2 previous
    • 17335038 17335038 on Jun 14, 2020

      'Good to hear that it is still in place, as trying to remove the double-sided tape will likely leave some sort of damage on the mirror.

Next