How to Make an Extended Outdoor Faucet to Your Garden

14 Materials
$200
6 Hours
Medium

I have a story to tell you today about how an extended outdoor faucet saved a marriage.


Okay well maybe that’s a bit of an exaggeration, but let’s say that extended outdoor faucet at least prevented a whole lot of arguing this summer.


You see, we live on a half acre in the city, and my garden is placed in the farthest northern corner of the yard. This means a lot of hose pulling to water my precious little starts. And friends, logically to me, it just seems easier to leave the hose across the yard waiting for the next time I water.


My husband thinks differently.


He sees the hose across the yard as an evil plastic tube that the sun uses to burn lines in his yard and kill his precious grass. And I get it, I really do. He loves his grass and I love my garden. Whats a couple to do? Enter in the extended outdoor faucet from our spigot in the backyard. 


When I first talked about somehow adding a water faucet to my garden area Travis was against it. That meant digging a trench through his lawn and possibly messing with his sprinkler system. 

However, once he realized what was going to be his future with the plastic hose across the yard . . . he changed his tune. The trench being dug was but a small hiccup in an otherwise green and happy lawn. 


HOW-TO: EXTENDED OUTDOOR FAUCET 


What you’ll need:



HOW TO 

*These plans will vary for you based on your needs, the distance from your new faucet to the main one, and your house and yard varriations. Please use your discretion when using these plans.

1. Measure where you want your new watersouce to the source you’ll be connecting it from so you know how much pipping you’ll need. Think about how deep you’ll want to trench your line and if you have any obstacles in the way.

*NOTE: This is not a winter proof set up. The line will need to be blown out before frost each year to prevent the pipe from bursting.


2. Trench line using the trench shovel. We trenched eight inches down. Trenching anywhere from 6 to 8 inches will work. The deeper you go the longer you can use it into the fall before having to blow it out. We also used galvanzied piping because it’s more weatherproof.

3. From the watersource at the house, place the Y spliter on the end of the faucet sticking out of the house. On one side of the Y, connect the primary hose you’ll be using around the house. On the other side of the Y connector, that you’ll be extending out to the garden, attatch the Heavy Duty Coiled Spring Kink Protecter Faucet Extension.


4. Now assemble the galvanised pipe you’ll be half buring. Take the 18″ galvanized pipe and at one end attatch the galvanized elbow, making sure to use thread tape at all connections. This helps create a tight seal. Connect the elbow to the Glavanized steel nipple, (side note, how is anything called that? Steel nipple?!?) the connect the coupling. To the couppling attatch the brass male adapter.


5. Once you have this L pipe assembled, go ahead and attach it to the faucet extender.

6. Connect the plastic pipe to the base of the galvanized elbow pipe using a hose clamp. Carefully run the plastic pipe from there out to your new faucet.

PREPARING YOUR NEW EXTENDED FAUCET:


7. This is very similar to how you built the previous connector, except you’re placing a faucet on the end and have to think about how you want to secure the pipe into the ground.

4. We secured the pipe into the ground using a 4×4 post in concrete.

Secure the faucet to the post, let concrete set for a couple days, and you’re ready to go!

All these before and afters make my heart go pitter patter.

Bad before photo I pulled from Instagram because I didn’t get a real photo!

Do you have questions? Something we said doesn’t make sense? Let me know in the comments and we’ll try to correct it!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Eryn | Eryn Whalen Online
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 9 questions
  • Jacques Franken Jacques Franken on Jun 07, 2021

    I don't know about winter in your country How about freezing temperatures in wintertime? Shouldn't your galvanised tubes have been isolated in order to protect them against freezing and cracking open because - due to the expansion of thawing water - too much pressure is exerted on the pipes? Next, another point to consider: how deep did you dig the moat your pipe runs through? A full-length plastic drainage pipe will certainly protect your pipe from frost as well as from being accidentally stabbed into it with a spade. Yes, not cheap but your marriage is worth more right?

  • Sharon Lilly Sharon Lilly on Jun 08, 2021

    Nice explanation of steps for this project 👏. If you’re in a cold winter area, wouldn’t insulation in or on pipe prevent freezing/bursting?? I’m in central Florida so I doubt it’ll be an issue here…

  • Daisy@TX Daisy@TX on Jun 06, 2022

    very nice and well explained however what is "blow out"? Is it same as drain?

Comments
Join the conversation
2 of 31 comments
  • Bs253041600 Bs253041600 on Jun 06, 2022

    Well, my husband and I were just talking about needing something like this for a small rose/flower bed I've started. I mean like just yesterday evening...so I'm going to show him this and hopefully I won't have to be dragging the water hose across the yard for much longer. Thanks for the great explanation of all aspects of this project. ☺️♥️

  • Mary Russell Mary Russell on Jun 06, 2022

    I would advise almost all to get the "frostproof"faucet.Unless you can absolutely guarantee never to have freezing weather,then get the right "tool for the job".

Next