The Beautiful Way to Solve This Kitchen Problem With a Flower Pot!

11 Materials
$15
20 Minutes
Easy

Vintage is my vibe, but I don’t always want to shell out big bucks for real vintage pieces. I had been looking for the perfect utensil caddy for my kitchen, and I realized that I had all of the tools I needed to create one that fit my aesthetic. Using basic supplies, I threw together a French country utensil caddy from a simple terra cotta pot. Using stamps, I decorated it to perfectly fit my space. In this tutorial I’ll show you how to make your own and give you some tips and tricks for working with stamps. Check it out!


Tools and Materials

Tools and Materials:

  • Terra cotta pot
  • Paint
  • Chip brush
  • Blue shop towels
  • Stamps
  • Scrap wood
  • Cling wrap
  • Baby wipes
  • Brayer
  • Wooden feet
  • Glue
Paint the Pot
Paint the Pot


I started by painting my pot. I wanted to achieve a vintage farmhouse look on the pot, so once I had painted a bit of the paint on I went in with a wet towel and moved the paint around, creating more of a whitewashed look. 

Rub the Paint In

I continued with this technique until I had achieved the look I was going for.

Painted Terra Cotta Pot

Tip:

Clay absorbs paint very quickly, so you don’t have to wait too long for it to dry.

Stamp
Stamp


You can use different mediums for the stamps, but I chose to go with paint. When working with stamps you need to use a brayering surface for the stamp to pick up the paint. 


Tip: 

Create a simple brayering surface by wrapping a small board with cling wrap. When you’re done, clean-up will be as easy as just pulling the wrap off and throwing it away!

Roll Out Paint

Once I had my surface ready, I added a bit of grey paint and then picked up a thin layer with my brayer. You really want to use as little paint as possible here. If you use too much your stamp won’t end up crisp and clear.

Lay Down the Pot

Then I set my pot sideways on my working space with two rolled up towels holding it in place.

Paint the Stamp

I pulled the stamp away from the backer sheet and lay it on my worktable. Then I rolled on a coat of paint with my brayer. These stamps are super easy to work with on curved surfaces because of how flexible they are. 

Press the Stamp

With the stamp fully painted, I gently lay it on the pot, starting at one end and slowly walking my fingers along the edge. I’m going for an aged look, so if there are some spots without paint that’s totally fine.

Stamped Terra Cotta Pot


Tip: 

Keep baby wipes on hand when working with stamps. It makes it easy to wipe off the stamp if you don’t have time to fully wash it just yet. 

Stamp Again

I repeated the process with another floral stamp.

Place the Stamp

Tip: 

Work quickly when using paint and stamps. They tend to dry much more quickly than ink.


I measured and planned before I started, so I already knew exactly where I wanted to place my stamps. I added two more stamps with the floral stamp. 

DIY Stamped Utensil Caddy

Reminder:

We’re going for a vintage feel, nothing needs to be perfect here!

Add Feet
Add Feet


I wanted to add one last thing to my utensil caddy to make it stand out, so I decided to add some feet. 

Paint the Feet

I decided to do a faux stain on them. I picked up a bit of leftover paint from my brayering surface with a baby wipe, and wiped paint all over the knobs that I would be using as feet for my caddy. This is a great technique to get a quick faux stain on wood without shelling out for a whole can of stain.

Place the Feet

Once the feet had dried, I went ahead and glued them onto the pot. I placed them in a triangular format and glued them into place using Titebond Quick and Thick glue, one of my favorite glues to use in the workshop. It dries super quick and once it’s on, it’s not going anywhere.

Glue the Feet

If you want to you can go ahead and use a clear matte sealant, but as my utensil caddy will be living in my kitchen, I skipped this step.

DIY Utensil Caddy

And there you have it, a simple project that will bring some country chic into your kitchen. Have you ever worked with stamps? Let me know in the comments below!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
3 of 6 questions
  • Tessa Tessa on Jun 24, 2020

    Yes, please - what stencils did you use? The Amazon link doesn't go to what you used.

  • Brenda Beatty Brenda Beatty on Jul 01, 2020

    This is beautiful. But, I wonder if it would break easily for kitchen tools? I have a tendency in my haste to drop them into the container.

  • Shuganne Shuganne on Jul 01, 2020

    Can you tell me more about French country/vintage style? Or point me to a good resource to get a feel for it? I put my kitchen utensils in a gallon crock (and inverted a saucer in the bottom to spread out the handles.)


    I'm also wondering if this would absorb spatters from the stove or sticky fingerprints. My crock had been glazed.


    Your project looks like fun and I could see it in a smaller version on my desk holding pens, pencils, scissors, rulers, markers, etc., etc. TFS!

Comments
Join the conversation
3 of 46 comments
  • Emmawilliams1 Emmawilliams1 on Jun 24, 2022

    Really cute and impressive!!...I personally use cans. One coffee can and 2 smaller...Everyone loves the shabby rustic look....Just frugal HEY, EVERYONE OUT THERE! HAVE A WONDERFUL SAFE, FUN, FOURTH OF JULY!!!

  • Juniper Juniper on Jul 01, 2022

    That’s really cool how you put the stencil on, I should try that!

Next