DIY Plant Bench in 1 Hour

Home by Heena
by Home by Heena
4 Materials
$12
1 Hour
Easy

I was invited to co-host One Hour DIY this week! This was an opportunity to show a quick and fun project you can do in about 1 hour. I considered doing a stencil or colorblock wall, but wanted to try something a bit ambitious. And I say ambitious only because this was my first attempt at woodworking! This would be easy peasy if you have previous experience.

Cut the two boards


Cut the 2" x 6" x 8 ft common board in half. These two ~4 ft pieces will become the top of the bench. If needed, make additional cuts to get them to the same length.


Cut the 2" x 4" x 8 ft common board into four 6" pieces and four 15.5" pieces. These will be made into legs. Again, make adjustments to get them to be the same length, if needed.


This is what you will have by the end of this step:

Put the leg pieces together


Take two 15.5" and two 6" pieces and make a rectangle. Attach them together with construction screws.


This is what you will have by the end of this step:

Attach the legs to the bench top


Place the two 4 ft boards side by side on the ground. Place each leg 1" from the edges. You can adjust the legs to be closer together if you'd like. Screw in the legs to the bench top.

The Final Product

The finishing touches didn't happen in the 1 hour timeframe, but I plan to sand, stain, and seal the bench on another day. This project is definitely doable in an hour, if not less for a more seasoned woodworker. The best part is that my plants finally have a central location to soak up the sunshine!


Head over to my blog post for additional details and sources and follow along on Instagram for future projects!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
  3 questions
  • Maura Maura on Jul 07, 2020

    Really nice and well built for plants I like it as a seat...

  • Donna Donna on Jul 15, 2020

    How much did the supplies cost

  • Betty Betty on Jan 21, 2021

    how tall is the plant bench? Thanks

Comments
Join the conversation
3 of 13 comments
  • Teresa Stephenson Teresa Stephenson on Jul 23, 2020

    Yes I will have to try this project but I’m going to make mine a little smaller to fit on top of 3 drawer dresser. I’m also going to sand, stain and paint everything before putting it together. I will definitely follow you for future projects.

  • Linda Abate Linda Abate on Jul 10, 2021

    Nice project. A great way of using scrap pieces of wood that might be hanging around. Not only great for plants, but a great bench for a kids room to sit and read, or in the entry way to sit and put on and take off your shoes. Thanks for sharing.

Next