How to Build a DIY Greenhouse

4 Materials
$2200
4 Weeks
Advanced

Y'ALL, WE DID IT. I'M STILL IN SHOCK AND VERY TIRED BUT WE DID IT!!!! THIS POST IS ABOUT THE JOURNEY OF HOW TO BUILD A DIY GREENHOUSE. BECAUSE WE ARE NOT PROFESSIONAL BUILDERS, THIS POST IS NOT INTENDED TO BE A PROFESSIONAL TUTORIAL BUT IS MEANT TO INSPIRE YOU TO NOT GIVE UP ON A DREAM AND HOPEFULLY ENCOURAGE YOUR STEP OUT OF YOUR COMFORT LEVEL TO TAKE ON NEW PROJECTS.

Clear the spot

This is the area just behind the farmhouse where the Greenhouse would be constructed. We had cleared the trees from the area and were ready to get started. Next, it was time for some serious window shopping. Then the Covid19 Pandemic hit our country. Suddenly, all thrift stores and vintage shops were closed which resulted in no window shopping. However, complaining about the situation paid off because a follower contacted me with an offer. He had several sets of french doors, rescued from a coastal home after hurricane Florence. He offered to sell them for a great price.

Draw your plan

Once the doors arrived, I drew a rough plan and it quickly became evident that the doors would allow more than enough light for the space. Therefore, the windows were no longer needed.

Materials Needed

Although the materials will vary from project to project, you can see what we used here.

Build a Deck Base

Since our carpentry skills were limited to building decks, we started construction as though we were building a deck base. In addition, concrete blocks were used to level the foundation. After the frame was built, the 2 x 6 x 16 floor joist were installed using metal hangers.

Lay the flooring


Build the walls

Next the construction of the walls began. With the aid of a nail gun, chop saw and my plan, the walls came together. The sketch was drawn to scale and really helped with the placement of the walls and doorways.

The Rafters

Prior to installation, all the boards were painted with Kilt z Primer. Installing the rafters was a little more involved than building the walls. This was primarily because of the height involved and working with only two people. I just held everything steady while my husband did the ladder climbing and attached each rafter.

Door Frames Installed

It was important to be sure each door frame was square prior to hanging the doors. We did a lot of measuring and leveling to get them square.

Hang the Doors

These doors are super heavy and hard to manage with just 4 hands. Although we measured and re-measured the door frames, more than one door had to be re-hung to adjust the level.

Install Roofing & Ridge cap

 Prior to installing the roofing material, 1 x 4 boards were attached to the rafters to allow the roofing to attach to them. The clear polycarbonate roofing material was attached using roofing screws. In addition, as the roof was being attached, my husband also installed the ridge cap as he moved from the front of the building to the back.

The challenging part of the roof was that my husband had to do it all himself and my job was to hold the ladder and pray he wouldn't get hurt. There may have been some tears during this part. Note: Using a ladder to do this part of the project is not recommended. In hindsight, the job would have been much easier and safer had we rented scaffolding. However, the work is completed and many lessons were learned. LOL  

Install siding and exterior plywood

Finally, the walls are completely closed in and the roof is finished. From this view, you can see the reclaimed ship lap siding that was used to cover the exterior. Since there was not enough of the ship lap for the entire project, outdoor siding was added to fill in the gaps. To pull the exterior together, it was painted with White Dove exterior paint by Benjamin Moore. In addition, a small porch was a last minute idea for the DIY Greenhouse. At this point, the construction has been underway for exactly 3 weeks.

Interior Touches

A thrift store chandelier got an update and works perfectly inside the greenhouse. Solar lights have been added because there is no electricity in the greenhouse. See how to re-purpose a boring thrift store chandelier here.

The finishing touches

Field rock was used to fill in around the foundation and a few larger rocks were added as steps to enter the Greenhouse. All the french doors were installed to open outward because this would allow the doors to open without disturbing anything on the interior of the greenhouse. And in addition, it creates great air flow. The DIY apothecary cabinet was another transformation we did for greenhouse storage. You can see the before here.

I hope you enjoyed this process. My husband was working from home during this time so the process didn't take nearly as long as it would have normally. He suggested we call the greenhouse Covid 19. LOL

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Rachel The Ponds Farmhouse
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 9 questions
  • Andrea Booth Andrea Booth on Aug 26, 2020

    How did you manage to shove the fieldstone under the deck once you'd built the deck. It looks like they fit in perfectly.

  • Rebecca Stauffer Rebecca Stauffer on Jul 04, 2021

    why didn't you put headers over the doors?

    It does look great though!


  • Chris Olechoski-Schmidt Chris Olechoski-Schmidt on Aug 20, 2021

    Do you hire your husband out??(LOL) I love this!!! Love that you also put a chandler in there!! Really makes the place!! I just makes me happy!

Comments
Join the conversation
4 of 119 comments
Next