DIY Floating Shelf Planters

9 Materials
$20
2 Hours
Easy

After building cedar frames to go around the windows of our garage, I sensed it didn't feel done, it needed something more.

Buy supplies


I've forever wanted some kind of planter box to liven up the garage face but without creating a million un-repairable holes in the siding and never quite could figure out an idea. Well, honestly, I was too busy with other projects to think about it.


Until I framed the windows in cedar....then it hit me: a floating shelf!


I picked up one piece of 1x8 by eight foot cedar and a box of 10 grow pots.

Figure out the math


You don't need a fancy program for this, just some math skills and a calculator, but it was hot and I'm no longer good at math.


I set the right and left cups at 4" on center in from the edge then divided the rest of the distance for three more cups, a total of five per planter.


Be sure to swing by the blog for all sorts of fun and not so fun math errors I've made over at Flipping the Flip!

Cut and measure


Next I cut the wood in half (hot tip: measure the length of the wood before dividing in half as it's rarely exactly what it should be and that can mess you up).


Here I measured out a 3 1/2" diameter hole for the grow pot cup and scored it with a compass.

Drill a starter hole


Drilling a large starter hole gives you room to work with your jigsaw to cut out the circles.

Cut out hole


Not my finest work, eh, but that's ok. The little grow pots (which are lightweight and small meaning they won't get heavy and pull on the shelf) fit right in and stop at the top lip.

Grow pot in hole


See? Perfect.


For extra details about this project and the cedar frames I built, be sure to check out the blog post here.

Install


After cutting out all the holes for the grow pots, it was time to install.


I pushed the 1x8 piece up against the siding as tight as it would go then drilled a hole through it into the cedar frame I built. I then sunk a pole barn screw in to secure (only because I had them and no other outdoor screws).

Secure


A few more screws, and voila! Done!

Seal


If you'd like, feel free to seal up the cedar to eliminate or slow the graying effect. I used Watco Teak Oil + Stain in Greystone.

Plant and enjoy!


Can't wait for next spring to plant these lovelies up!

Enjoy some more


Won't it be nice with oodles of flowers and trailing plants?! Oh I can't wait.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Becky at Flipping the Flip
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 6 questions
  • Harley Harley on Apr 16, 2021

    So if my house is stucco (around the front facing window); do you think it is possible to anchor / drill into that stucco in order to mount the wood frame? (or is it too weak to hold that weight)

  • Teresa Teresa on Aug 05, 2021

    Do you have a drip water system? Here its 92 today, id be watering those pots every few hours.

  • Cla23816380 Cla23816380 on Aug 05, 2021

    What happened to the tray that fits underneath pot that catches water??

Comments
Join the conversation
3 of 120 comments
Next