Сute Stand for Eyeglass.

Polkilo
by Polkilo
4 Materials
$15
4 Hours
Medium

Hello my friends!

Today i will show you how i made cute stand for eyeglass. There is nothing more adorable then a dog/bear eyeglass stand / glasses holder. An eyeglass accessory that will keep your glasses safe and add a smile to your day. Functions as both a unique home decor and display, the eyeglass stands make unique gifts for animal lovers. Great as an office gift, as a gift for that coworker that always leaves their glasses sitting on their desk. This dog/bear eyeglasses holder makes a perfect addition to any desk or night stand.

For this project i used such tools:

- Dremel Moto Saw

- Screwdriver

- Speed Square (Aluminum)

- Engraver Mini Electric Drill


I used different types of wood:

- Pine

- Оak

- Birch-tree

At first i print picture and cut it on pieces. 

Then I redraw the outline of the details on a wooden Board.

My little daughter helps me drawing ;)

Now we will be cutting pieces. I used Dremel Moto Saw. 

It's really easy to use, so even my little daughter can use it. I help her to cut little pieces. She is my little helper and always want to try my tools ))

When we cut all pieces, we checked how it is look like in real. Looks pretty fun. But the corners are not smooth, so i have to sand everything. 

For this purpose i used screwdriver and polishing disc. 

After sanding, all the faces became smooth and flat.

Now I mark where the eyebrows and nose will be located. I circle the places with a pencil.

With the help of an engraver, I made a recess in the Board.

Then I'll stick eyebrows and nose in there.

I used a chisel to make grooves. I'll put bear ears in them. 

Then I added some PVA glue, pressed it with clamps, and left the glue to dry.

Also, using PVA glue, I glued the bear's eyebrows and nose

Now I need to make a stand. I will use an 8 mm thick aluminum tube. I drilled 2 holes. 

One at the head, one at the base. Cut the tube 10 cm long.

Cut the tube 10 cm long.

Almost everything is ready. We just need to cover the eyeglass holder with oil and glue the eyes.

I also glued the tube.

That's it! Our eyeglass holder is ready. She looks really cute! what do you think? Write in the comments who it looks like more a bear, or a dog?

So friends! Thank you for watching my post. I hope you enjoyed it!

See you soon! :)

Suggested materials:
  • Birch-tree board   (hardware store)
  • Pine board   (hardware store)
  • Oak board   (hardware store)
See all materials
Frequently asked questions
Have a question about this project?
  2 questions
  • 17335038 17335038 on Jan 11, 2021

    I vote for Bear!

    Did you make one for the shop safety glasses also? That way you will always find them when needed.

  • Cw125385796 Cw125385796 on May 12, 2022

    Where can I print out the design and where is the measuremens?

Comments
Join the conversation
3 of 5 comments
  • Barbara Barbara on Nov 02, 2020

    This is a wonderful project! So grateful you are sharing your time and talents with your daughter. Super job. Now I need to make one for my granddaughter!

    • Polkilo Polkilo on Nov 02, 2020

      Thank you so much:) i,m sure that well be great present 😉

  • Suzie 50 Suzie 50 on Nov 10, 2020

    What a great idea, especially for a little one's nightstand! My daughter's glasses always seemed to fall onto the floor at night. This would've been so helpful.

Next