Easy DIY Nature Ornaments From Clay

9 Materials
$10.00
2 Hours
Easy

How to make DIY nature ornaments using air dry clay. Use artificial or natural botanicals to create beautiful imprints.


These diy nature ornaments are so simple, yet so pretty. And, they are very easy to make too.


I was in the mood for easy Christmas ornaments to make, but I wanted something with a natural and soft feel.


Since air dry clay picks up fine details so amazingly well, I got to thinking about making imprints of floral pieces.

Since air dry clay picks up fine details so amazingly well, I got to thinking about making imprints of floral pieces.


The funnest part of making these ornaments is when you have rolled the clay over the botanicals and then you get to peel them out of the clay. 


The wonderfully detailed imprints that are created are quite gratifying. 

Materials Notes:


Decide which pieces of floral stems you want to use for your imprints. I was surprised that some of these thicker pieces actually came out great. One of my favorites was so thick it made a little hole in the ornament, but it’s not noticeable. 


The clay will pick up fine details of just about everything. You just want to select something where most of the piece will fit within the size cookie cutters you have, otherwise you can crop the imprint so that it does fit.


You have the option of glazing the clay with nail polish, or if you want the clay to be a single, uniform color. 

If you want a single uniform color like the ornament above, then you will need acrylic paint. I used Craft Smart paint and it required quite a bit to color the clay. 


It also took patience to work the color into the clay to get it looking uniform. There may be other acrylic paints that are easier to work with. I have more details in the Step 1 below.

STEP 1 | PRE-COLOR THE CLAY (OPTIONAL)


Instead of glazing the clay after the ornament is dry, you can premix the color. This will give you a consistent, uniform color throughout. 


If you wish to glaze the clay instead of pre-mix the color, then move on to Step 2.


First, take some acrylic paint and mix it in with the clay. I recommend trying this with a small piece first so you can see how the clay absorbs and mixes in with the clay. 


I used navy blue paint, but you can choose a holiday color instead.


It’s going to take some extra time to get the paint mixed in evenly with the clay.


If you like the look and it mixes well, then go ahead and do this with a larger piece. If you are having trouble getting the color to mix in, you may want to try a different brand of acrylic paint.


The color you have when the clay is still wet will be lighter when it dries. Once the colors are mixed in well, continue on to the next step.

**For another great clay ornament tutorial, check out the Grinch Clay Ornament. 😀


STEP 2 | PREPARE THE AIR DRY CLAY


The clay needs to be softened a bit first before rolling, so knead the air dry clay so that it warms up and softens, for a few minutes.Now, roll out the clay to about a ⅛” thickness. 

STEP 3 | LAY OUT THE FLORAL SPRIGS


Place the artificial greenery onto the wax paper and space them ample distance apart. 


You will be re-rolling the clay and doing it again until you have as many ornaments as you’d like.

Take the rolled clay and place it on top of the greenery, then take the roller and roll the clay on top of the sprigs so that they make an imprint. 

Lift up the clay and flip it over and remove the artificial pieces. If they stick, use a toothpick to lift them out. 

Now take the cookie cutter and cut out your imprints. 

Take the remaining clay scraps and put them together into a ball shape and roll the clay again. Continue doing the same with various pieces of greenery until you have the amount you want.


If any of the ornaments have marks on them, you can dip your fingers into a bowl of water to smooth them over. 

Before letting these dry, take a plastic toothpick and press it through-the top of the ornamen, just take care to not get too close to the edge. 


STEP 4 | SET ASIDE THE DIY NATURE ORNAMENTS TO DRY


Let the clay ornaments dry. The drying time for these will be 1-2 days, but you can shorten that by using a space heater or an oven. With a space heater, you can get these dry in about 4- hours, with flipping in between.


I haven’t tried the oven method, but I do know that 180-200 is a good temperature, just keep an eye on this because I don’t know how long it will take. It’s likely quicker than the space heater.


Also, be sure to flip these over a couple of times.The clay needs to be completely dry before you glaze it.


You will be able to tell if it’s dry if the whole piece looks uniformly white. If it’s still damp, the edges will be white and the middle still beige. 

STEP 5 | COLOR THE ORNAMENTS WITH A GLAZE


First, you should give them a quick sanding. The fronts may have abrasions or finger marks, but it’s mostly the sides that need a quick once-over.


Now that the clay nature ornaments are dry, apply the nail polish glaze. If you have pre-mixed your colors, then skip the rest of this step and move on to the Final Step.


To glaze the clay ornaments, use colored nail polish. Just brush the polish on with the brush that comes with it. 

I applied colored nail polish to the fronts and then wiped some of them down with a paper towel. I thought some of the colors looked better not wiped down and so left those as is.

For some of the ornaments, I applied two different colors. The second color was applied after the first one was dry.


I painted the sides of a couple of these diy clay nature ornaments, but I preferred the way the ornaments without the painted sides looked because I like the contrast of the natural color. 


So if you prefer, skip applying polish to the sides.After the colors on the front are dry, go ahead and apply the clear nail poilish. 

STEP 6 | SEAL THE CLAY


The sides and backs need to be sealed, so use an acrylic sealer and a foam brush to apply the sealant.


I used a concrete sealer that I had on hand, but you can use any type of acrylic paint sealer or a varnish.


FINAL STEP | HANG YOUR AIR DRY CLAY NATURE ORNAMENTS


**For another air dry clay tutorials with a Christmas theme, out this  Air Dry Clay Candle Holder For Christmas.🙂


To hang these Christmas ornaments, just thread the decorative wire through the hole and either twist the wire together and create a hook or just create a loop that you can tie.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Artsy Pretty Plants
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  2 questions
  • Leslie Leslie on Dec 27, 2020

    Your final ornaments are lovely but the wire cheapens the work. Why not use very thin ribbon or just make a tiny bow and glue gun near the hole area and hang with filament or copper or brass S hook you can make. If you really want to use wire just use one strand of copper or brass wire and make an S hook that closes on one end. You can also make a wire ring with a pencil as a form and hook the S hook into the ring.

  • Kellie Kunz Hilliard Kellie Kunz Hilliard on Dec 23, 2021

    What kind of air dry clay did you use? I went back to look and I may be blind but I don't see a brand or recipe? I have wanted to do some clay work, but am worried about getting the wrong kind of clay!

    these are awesome and I AM stealing them for next year! I work in acrylics and sealer so will probably stick with that, but I kinda like the smeared off look you got with the nail polish too!

Comments
Join the conversation
3 of 7 comments
  • Christie Decker Christie Decker on Dec 20, 2020

    Another idea for the air dried clay is cold porcelain, you can order it if you prefer to, but it's simple to make up in your kitchen either on the stove or in the microwave. You will have 10 to 15% shrinkage, so be aware when you choose your cutters.


    I used to work in bread-dough clay, but found that insects and rodents would get into them over time. I have not had any issue with either problem in using cold porcelain.


    Using cold porcelain for many years now, I've tried multiple ways to color it from cake decorating colors; liquid and gel, acrylic and water color paints, oil paints and natural fabric dyes; powdered and liquid.


    I found that for what I do, creating life-like flowers out of the cold porcelain, I get the best, brightest and longest lasting colors from the powdered dyes for natural fabrics. (they won't work on plastic based fabrics) You can purchase small packets of dye, you don't need to get large ones unless you want to use the coloring for other projects also. It will work on wood, silk, cotton, linen, etc. You can also use the liquid form (just mixing it with water, to make ink to brush onto your projects.


    It doesn't take much of them, so you don't need a lot either. The nail polish works well to seal them also.

  • Leslie Leslie on Dec 23, 2021

    Hello again Artsy. If you like twisted wire you can make your own by taking a length of wire bend in half, put the looped end in a vice and clamp the other end inside the jaws of a drill without the bit. Go slowly when pulling the trigger until you get the hang of it. I forgot to tell you that in my first post to you.

Next