Furniture Makeover Ideas | Italian Caned Chairs

Cindy Rust
by Cindy Rust
2 Materials
$30
4 Hours
Medium

Furniture makeover ideas are in abundance on Pinterest. Today I will show you several ideas to transform a pair of caned chairs! Let’s dive in!

Remember where we left off?? The caned chairs were prepped, painted, and sealed with wax. Both chairs were painted in Miss Mustard Seed Milk Paint in Artissimo. The caned chair on the left has been waxed. The one on the right wasn’t waxed until later. Doesn’t the wax bring out the gorgeous tones and color of this milk paint??

You’ll remember that some of the caning was damaged. I removed it and decided to add upholstery fabric to the back of the chair. That’s one of the furniture makeover ideas I will share with you in just a bit. For now, let’s deal with the seat! The caning in the seat area wasn’t in bad shape but it is still old. Hubby and I decided to add some stability to the seat of the chairs. We made a pattern in the last post. Here you can see that he cut 3/4″ plywood and attached it to the underside of the caned section of the chair. He used a Kreg Pocket-Hole Jig system with six screws to make sure it was secure. I painted the top of the wood before he attached it. The top of the wood will show through the caning and I wanted it to look nice. I chose a custom mix of General Finishes Snow White and Linen. You can see the full reveal in the next post!

The seat would need some additional cushioning since the plywood would be unforgiving to a bottom if you get my drift! 🙂 A little cushy for the tushy! 😉 Do-Sew is a pattern-making material that I have used for years when making clothing. It is thin, see-through, and cheap. 🙂 You can see here I used the Do-Sew to create a pattern for the cushion.

After creating the exact pattern, I added a 1/2′ seam allowance around the whole piece. I added the seam allowance directly on the fabric I used for the cushion insert, which in my case is a leftover sheet. Top sheets make the best cushion insert covers! You can find top-sheets at yard sales, thrift stores and discount linen stores.

Here’s a quick tip when sewing the seam. A section of it needs to be left open to insert the cushion. I like to stitch as you see in the image – begin stitching with the fabric turned so that you stitch 1/2″ inward, place the needle in the fabric, and pivot. Continue stitching all the way around.

When you get to the end, stitch the same way only in reverse – place the needle in the fabric, pivot and then stitch off of the fabric. Doing this little step helps to turn the fold inwards for easy stitching after the foam is inside the cushion cover. This especially works with a straight seam but is also helpful in a curved seam like the one you see below.

Next, I traced the same pattern, without the seam allowance, onto the foam. One-inch foam will be enough cushion for this pair of caned chairs.

An electric knife goes through the foam like butta’ baby! This little tool was only about $15 on Amazon. Seriously, so easy to cut foam with an electric knife!

Two layers of upholstery weight batting will add a softness to the foam. This is a necessary step in upholstery. Without the layers of batting, the foam would seem stiff. We want a soft look for this pair of chairs! Cozy and comfy! It’s best to use a spray adhesive for each layer. Do this outside on a day that isn’t too windy. Protect the floor area too. This stuff is sticky!

🙂 Doesn’t everyone smile when inserting foam into the cushion cover?? Haha! Roll the batting-covered-foam towards the center and it will make it easier to insert into the cover. You can even use a plastic trash bag over the foam. After it is inserted, just rip the plastic off and out of the cover! I use this technique when I wash the cushion covers on my furniture. After smoothing out the batting-covered-foam, stitch the opening closed by hand or by machine. In the next post, you will see the final result of the seat cushion. It is assembled basically the same way except that I added a cool zipper. That way the decorative cover can be washed.

The caning on the back of the chair was very damaged and need to be removed. The backside of the caning on the back of the chair was in perfect condition so I left it intact. Only the front section had to be removed. I used the Do-Sew to create a pattern for the hollow section of the chair back.

Then I used that pattern and cut a section of 1″ foam. It’s hard to see here, but the foam fits perfectly in the hollow section of the chair.

The foam wouldn’t look so pretty from the back so I decided to add a layer of fabric. In this case, I used a dropcloth. It also matched the painted wood in the seat reinforcement I talked about earlier. Having the two match will make it seem like it was meant to be that way from the beginning!

Once the backing fabric was smoothed out, the front and decorative piece of fabric could be attached. This is a reproduction grainsack style of fabric made for upholstery. I love this fabric and have used it on several projects. First, I found the center of the wood framing on the chair. Then I lined up the center of this 3-stripe fabric with those markings. A straight pin holds it to the foam long enough for me to add some staples.

It is best to start stapling at the center and then work outwards. I don’t staple the entire edge of the bottom. It’s best to staple a few at the center of the bottom and then a few at the center of the top (opposite ends of each other). That way, you can keep the fabric taut. Not stretched, just taut.

Do the same on the sides. Be sure to stay aware of the stripe if your fabric has one. The stripe can get wonky if you pull too hard on one side. Aim to keep the stripe straight. Start on one side in the center, staple a few, then go to the opposite side in the center and staple a few. I like to add staples every two inches or so as a way of basting the fabric to the wood. When I have finished ‘basting’ the fabric, I go back and add more staples. They need to be close to each other to secure the fabric properly. kinda like sewing Think of this in terms of sewing – if the stitches are far apart, the seam would be weak. If the stitches are closer together, the seam is stronger. It’s the same with staples! And BTW, let’s not be critical when we rip out someone else’s staples. They were doing their job!! And yes, I am speaking to myself on this one!!

Cutting the excess away is always so much fun for me! The piece starts to take on shape at this point 🙂

Whew, that’s alot of work for one day!! Until next time! Thanks for stopping by! Be sure to subscribe to our blog updates via email so you don’t miss the reveal of this gorgeous pair of chairs! Sign up below and I will send you this fun freebie packed with ideas to reinvent for your home! join the journey Follow us on Instagram and Facebook for more behind the scenes of many of our projects. Pin any image in this post to your DIY projects or furniture makeover ideas boards on Pinterest! Your pinning and sharing with your friends helps our blog so much! Thank you!! BTW, you can see part one if this furniture makeover ideas tutorial in this post: Repairing Furniture | Italian Caned Chairs

Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Cindy Rust
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  3 questions
  • Mickyhowle Mickyhowle on Feb 18, 2021

    Did you paint the wood part of the seat?

  • Gma Clara Gma Clara on Mar 10, 2021

    What about the suitcase. Can’t find what you did

  • Shansmow Shansmow on Feb 19, 2022

    What does the back look like?

    thanks for the inspiration!

Comments
Join the conversation
4 of 8 comments
  • Bonnie Woolever Bonnie Woolever on Feb 18, 2021

    WOW, amazing transformation!! You're a magician!!

  • Dl.5660408 Dl.5660408 on Feb 18, 2021

    The upholstery looks so lovely on those beautiful chairs😻. And thanks for the helpful tips💕

    • Cindy Rust Cindy Rust on Feb 21, 2021

      You are most welcome! Glad you enjoyed the tutorial! Be sure to hop over to my blog for lots of tutorials! www.reinventeddelaware.com

Next