How To Construct Custom Built In Shelves in Wall

22 Materials
$100
2 Days
Advanced

Built In Shelves In Wall


Does your home lack storage? Are you tight on space? Perhaps you don’t even know where you could even place additional storage.

This was the case for one of our clients.


She spends a good part of her day in the salon, whether it’s working with her own clients or instructing her students. The space itself is small and simply overcrowded.


She was in need of ample storage space for products to sell, coloring supplies, etc. Certainly, this alone would give her students more room to observe and learn.


Several years ago she resolved that the only solution would be to add this much needed storage space directly in the walls.


Her husband began by opening up the wall, and prepping the space for shelves. And this is exactly how it sat for several years. Clearly, we were happy to help with this problem!


You’ll be inspired today as we share how to construct custom built in shelves in a wall with our step by step guide.


Please see our video tutorial for instruction as well. The reaction of our client alone to these completed shelves is PRICELESS!

BEFORE
AFTER

Here you see the before and after.

As mentioned before her husband opened the wall and framed an opening for the shelving. Then it sat this way for several years, because her husband had no clue how to build the shelves.


NOTE: Take precautions when opening up a wall for additional storage space. If it’s a structural supporting wall, framing will need to include a header for the wall to maintain stability. If you’re not sure, ask for help. You don’t want to compromise the structure of your home.

The first thing you’ll need to do is have a plan. Start with the open dimensions framed in the wall.


The opening in our clients wall was 72.75″ H x 26.75″ W. x 7.5″ D.

Then sketch out the design.


Per consulting with our client we agreed on making each section of the shelving unit roughly 14″ H. With this in mind, we were able to sketch out the complete design of the shelves.


We planned to construct them using .75″ thick MDF. So we accounted for the thickness of each shelf in our design.

With our sketch in hand, we headed to The Home Depot to purchase supplies.


We had a 4′ x 8′ (.75″ thick) board of MDF cut into 7″ strips.

This not only allowed us to get the wood home easier, but saved us from the work of cutting the wood to size at home.


Additional supplies used to construct these custom built in shelves in wall are as follows:

  • chop saw
  • measuring tape
  • framing square
  • level
  • router with 3/4″ cutting bit
  • jig
  • palm sander
  • wood glue
  • pneumatic nail gun
  • air compressor
  • brads
  • rubber mallet
  • finish molding
  • caulk
  • putty
  • putty knife
  • paint
  • paint brush
  • paint sprayer (optional)
  • shims
  • frog tape
  • wet washcloth


The first step to constructing custom built in shelves in a wall is to cut the side boards to the desired length. Then place a pencil mark on the 2 side boards where each shelf will be placed. 

Next use a framing square, draw a line across the surface of the side boards at each pencil mark. This will give you a visual guide where dados will be cut for each shelf.

The next step is to create grooves or dados in each vertical board for the shelves to slide into.


To do this we used a router with a 3/4″ straight cutting bit and set the depth of the bit to 3/8″, which is half of the depth of the wood.

For ease in making straight cuts in each vertical board we also used a jig my Dad built.


The jig is basically made with 2 pieces of wood screwed together perpendicular to one another. A groove or notch has also been cut in the wood to create a channel for the router to follow.

To begin cutting the grooves in each of the vertical side boards, lay them parallel to one another.


Then place the jig next to the side board. Position the groove in the jig next to the pencil mark indicating where the groove will be cut.

With the bit placed in the groove, it will allow the router to run along the edge of the top piece of wood of the jig thus making a straight edge for the router to follow.

Before you begin to use the router to create the grooves be sure to check that each side board are flush to one another and the jig is lined up where it needs to be.

In order to keep the side boards and jig from moving you’ll also need a second set of hands (or in this case feet). Having someone step on the side boards and the jig will hold each board into place while the grooves are being cut.


You could also use a large clamp to secure the boards together.

To use the router, first place the bit into the groove in the jig. The edge of the router will be lined up with the top edge of the jig.


Then turn the router on and allow it to come up to full speed.

At this time begin to slowly guide the router along the edge of the jig to create a perfectly straight groove in each vertical side board.


Repeat this process at each remaining pencil mark placed for the grooves.

Here’s a better look at the grooves created with the router.

After the vertical side boards have all the grooves cut, you can proceed to cut each shelve piece to length for these custom built in shelves in a wall.


Each of these shelf pieces were cut to 26.5″.

After each shelf piece is cut, take a palm sander to ease off a little bit of the wood where it will slide into the groove. 


We’ve used this method to build several other built in shelving units. Sanding the edges allows the shelves to slide into the grooves in the vertical side boards a little easier.

First apply a liberal amount of wood glue into the groove.

Next place a shelf piece into the groove.


Then use a rubber mallet to tap the shelf down into the groove. Be sure that the shelf is flush with the front and back of the side board. 


Continue with this process for each shelf piece.

After each shelf piece has been tamped into place with the rubber mallet, carefully rotate the wood onto its side.


Next, use the framing square and pencil to place a mark in the center of each shelf piece.


This will give a visual guide where the brads will be placed.

Then using a pneumatic brad nailer drive 3 brads directly into each shelf piece. One on each end and one in the center.


The combination of the shelves being fitted into the grooves with wood glue in addition to being secured with brads will ensure a sturdy shelving system.

After the shelves have been secured to the first vertical side board, carefully rotate the wood with the opposite end of the shelves facing up.


Apply a liberal amount of wood glue to each of the shelve edges.

Then place the other vertical side board on top of the shelve pieces. Be sure to line the shelves up with all of the grooves.

At this time, use the rubber mallet to ensure the shelf pieces are completely in the vertical side board. Again be sure to keep the boards flush with the front and back.

Then using the framing square, again place pencil marks in the center of each shelf piece.

Finally, secure each shelf piece in place with the pneumatic brad nailer.

To finish off the base construction of the shelving unit, place a board at the top and bottom, perpendicular to the vertical side boards.


Secure into place with wood glue and brads.

To create a more custom finish look for the built in shelves in wall, we like to add molding. This will conceal the rough edges of the MDF along with the shelf seams.


This not only gives it a more professional look, but it also gives the illusion that the shelves are thicker than they actually are.


Molding sizes we used are as follows:

  • 1″ x 2″ x 8″ primed MDF board; front of shelves
  • 1″ x 3″ x 8″ primed MDF board; sides and bottom edge of shelving unit
  • 1″ x 4″ x 8″ primed MDF board; top header piece of shelving unit

At this point, we measured the length of each shelf in between the two vertical side boards. The 1″ x 2″ x 8″ board was cut to size for each of the four shelves.


Then use wood glue on the front edge of each shelf and secured the molding into place with the pneumatic brad nailer.


The top edge of the molding is placed flush to the surface of each shelf.


The molding will hang past the bottom edge of the shelf.

All remaining molding pieces were cut to size and installed in our clients home.


More on this below.

After the molding has been applied to each shelf, use caulk in each seem to conceal each of the joints.


Allow to dry per instructions before painting.


The shelves were then painted before installation. This can be done with a brush and/or roller. We used our paint sprayer to achieve a nice smooth finish without any brush strokes.


All remaining molding pieces were also painted prior to installation.

Finally paint and secure the back of the shelving unit with the pneumatic brad nailer before installation.


We used the piece of bead board that was placed in the wall cutout as seen in the before photo. It hadn’t been secured to the wall. So we were easily able to remove it and attach it to the shelving unit.

Finally, the shelving unit is ready for installation!


Place the unit inside the wall cutout. Use a level and adjust the shelving unit with shims where necessary to ensure it’s level.


At this point, use the pneumatic brad nailer to secure the shelving unit directly into the studs. Then drive brads into the top header piece as well as each side stud.

Once it has been secured into place the remaining molding pieces can be added.


The 1″ x 3″ x 8″ was cut to the width of the bottom shelf and secured into place.


While the other 1″ x 3″ x 8″ boards were cut to the length of the shelving unit and secured into place.


Finally, for the header a 1″ x 4″ x 8″ board was cut 1/4″ beyond the width of the vertical molding pieces and secured into place.


Now use putty to fill in the brad holes and caulk around the outside edges of the shelving unit where it meets the wall.


Once the putty and caulk are dry, use a small paint brush to touch up these areas.


Allow to dry before adding any items to the custom built in shelves in wall.


Without a doubt, our client was beyond thrilled to finally have this custom built in shelves in the wall installed! Be sure to see her reaction in the video tutorial.

Once this shelving unit was installed, she invited us back to install another shelving unit in the other wall!


Now she has plenty of storage for the products to sell, as well as her coloring and other hair care supplies!


Does this method for creating additional storage space in your home appeal to you? Are your wheels turning as to where you can install something like this?


We hope you’ve been inspired by this tutorial and can follow the step by step guide of constructing and incorporating custom built in shelves in a wall in your own home.



Thanks for spending some time with us today!


And as always here at Sunny Side Design

WE HOPE TO BRING YOUR HOME TO THE SUNNY SIDE OF THE STREET!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Sunny Side Design
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  2 questions
  • Sue B Mitchell Sue B Mitchell on Feb 13, 2021

    This looks beautiful! But why is someone wearing open-toed flip flops around power tools? That’s not safe!

  • Corvina Corvina on Feb 14, 2022

    I love the SECOND shelf.

    Could I have the depth dimensions?


    When I first read 7.5" I thought, "I can not fit anything in on that and will be stuck with the back of the bathroom toilet, STILL!" Then, my husband said, "That's perfect for me!" He took the medicine cabinet when we bought this house ten years ago.


    I zoomed in on the products on both shelves. The products on the first shelf are smaller than what I own or what we have in the bathroom.

    However, that second beauty IS AMAZING!

    Zooming in on that shelf and WOW! SO MUCH MORE DEPTH! You can fit full-size bottles, towels, boxed items, and more!

    BRAVA!


    😺😺😸😺😺

Comments
Join the conversation
4 of 19 comments
  • Carolina's Art Carolina's Art on Mar 24, 2021

    It looks fantastic!!! great job girls!!!!

    • Sunny Side Design Sunny Side Design on Mar 24, 2021

      Thank you Carolina. We are so pleased with the way it turned out. For more budget friendly ideas we invite you to visit our website.

  • Chrissie Gallagher Chrissie Gallagher on Feb 11, 2023

    we did this years ago because we lacked storage in our house. all our shelves were below the waist so that our little kids (one was a climber) could safely find their books to read, and sit in the bookcase. they loved it and it was a solution to a problem.


Next