My Most Asked About DIY Project

6 Materials
$50
3 Days
Medium

I am asked all the time about my Cowhide Chairs in the Dining Area. I love a little whimsy in a room and these chairs definitely add whimsy. I did a tutorial on how I refinished and reupholstered these chairs in 2016. So many of you ask, so time to do a repeat post. I hope you enjoy it. This was a real beginner endeavor for me, but I love how they turned out.

Now they are by no means professional, but for my first time doing this kind of upholstery, I am thrilled.

(Let’s step back to 2016 and see the original post.)


Remember, this is what they looked like when I bought them. Really ugly upholstery and kind of an orange/blonde wood frame color.

The price was so amazing, I just had to see if I could redo them.

I started by removing the double welting cord that was around the edge of the chair seat, then I pulled the gazillion staples that held the fabric on. I discovered that the fabric was glued to a piece of batting that was also glued to a piece of foam. This came off all in one piece.

I took the cording off the back of the chair and then removed all the staples on the fabric and found the same thing. The fabric glued to batting and foam and it also came off in one piece. (You can see the cording laying on the floor) That left me with the back fabric, I removed all the staples in that piece of fabric too.

Now I had the fabric off the seats and back of the chairs, so time to redo the frame.

I removed the bottom piece of foam and left the rest of the seat intact since nothing was touching the outside frame anymore. Then outside for a good sanding.

You can see all the steps I did in refinishing the frames in this post.

OK now here is where I am a bad blogger. I didn’t take any pictures step by step on the seat part, but it is pretty self-explanatory. I just put all the foam and batting back on the same way it came off and then covered it with my fabric and stapled it down.

Here is the back.

Not perfect but I tried to keep my staples in a neat straight line.

The sides. I trimmed all the fabric close to the frame. This will all be covered with the double welting cording.

Miss Mustardseed has some of the most detailed YouTube videos on how to do this kind of chair. I watched several she had on how to remove all the fabric and then how to put the new back on. I used the old fabric that I took off the seat as a pattern. I did learn to cut about an inch larger around the fabric so you had something to hold onto to pull tightly as you stapled the new fabric back on.


I asked for your input and help. You guys were amazing with all of your input and I was surprised that you were just about tied on whether to use the scroll or the cowhide fabric for the backs of the chairs.

In the end I went with the cowhide and a little whimsy. Now I may be tired of it in the future, but since I learned how to upholster them, I can change the backs when I want to.


Now to do the backs of the chairs. You can see that there is an indented edge on the frames. The fabrics all go inside that rim.

I used the old fabric as a pattern to cut my new fabric.

I made sure to cut mine about an inch bigger all the way around so I had something to hold on to as I stretched the fabric tight.

I double-checked to make sure the fabric was nice and tight and straight on the back.

Then I trimmed all the excess off keeping the fabric inside the frame rim.

This is the foam and batting that I took off the chair when I took it apart.

Next I placed the foam that I took off back into the back frame and tacked it in a couple of places to hold it.

Then the batting went back on. I used some spray adhesive to hold it to the foam.

Now my top upholstery fabric goes on and it also needs to be trimmed so everything is inside the rim.

Here is the front all done. Now I just need to make the double welting and glue it around all the edges to hide all the staples.

UPDATE – – – We have way too much going on right now for me to try and figure out double welting, so I looked at another one of Miss Mustardseed’s videos and she showed how to add Gimp. So that is exactly what I did. I found some in a color that matched my fabric and used hot glue to cover up all my staples and finish the edge.

So here we are 4 years later in our new house and they are still going strong and I still love them. Not tired of the cowhide yet.

So, what do you think? I love how they turned out.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Marty @ A Stroll Thru Life
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  3 questions
  • D D on Mar 12, 2021

    How to recover old patio furniture

  • Brian Brian on Mar 13, 2021

    Where did u get the cowhide fabric

  • Monique Monique on Mar 11, 2023

    Cowhide fabric over what was on there before??? 👎🏻

Comments
Join the conversation
2 of 18 comments
  • Karen Karen on Mar 11, 2023

    Congratulations on NOT painting the frames. Takes guts in a decade that has declared war on brown furniture! The chairs look terrific.

  • Elizabeth Terrazas Elizabeth Terrazas on Mar 29, 2023

    Great job! They look awesome!


Next