Easy Plastic Plant Pot Makeover

VeryLiv
by VeryLiv
3 Materials
$3
15 Minutes
Easy

Anyone else having spring fever at the moment? Not the allergies – although I have that too – but the overwhelming urge to plant everything in sight. Sowing, pruning, propagating, repotting! It’s all well and good until you realize you got ahead of yourself propagating enough plants to reforest the Amazon, and you’re running out of plant pots...


Read the steps below or view the full blog post to find out how to upcycle any simple plant pot you found in your stash and turn it into a cool planter that deserves a place in your home.

All you need for this easy makeover is a plain plant pot and some raffia!

To start, apply a few coats of terracotta paint to your plant pot.


When painting, brush from side to side, not vertically, for a genuine hand-turned ceramic look.

Next, glue strands of raffia around the top.

Start weaving the raffia by grabbing 2 strands and knotting them about 1 inch down the side of the pot. Repeat with the next 2 strands and continue knotting this way all around the planter.

Once the first row of knots is done, add another row below in a diamond pattern

Continue adding rows of knots until you reach the bottom of the planter.

Finally, cut the strands short leaving about 1 inch below the planter. Fold this extra inch and apply a line of glue to hold these strands.

That’s all, now you can turn the planter over and start figuring out the crucial stuff: what plant will put in here and where will you place your planter.

Hope you enjoyed this DIY! icon


Follow me on Pinterest to catch my latest DIY ideas!

Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
VeryLiv
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  3 questions
  • Ellen Ellen on Mar 28, 2021

    How long did you make the strands? 3 times the height of the pot or more? The look is really cute!

  • Leslie Leslie on Nov 05, 2021

    Hi Liv, this is very well done and a great idea but have you had problems with the hot glue letting go from being submerged in moist soil? I know the glue itself is waterproof BUT when attached to some surfaces it will let go if continually exposed to water. If you haven't had any problems that is wonderful, but, I would first tack down the raffia on the ends with hot glue and then apply E-6000 or any real waterproof glue to the pot lay raffia on it and then spread more glue over the raffia. Let dry before weaving and adding soil.

  • Benjamin Benjamin on Mar 29, 2022

    How many strands of raffia did you use, glued around the pot to start?


Comments
Join the conversation
2 of 13 comments
Next