How to Install an Inexpensive Peel and Stick Backsplash Easily

3 Materials
$97
1 Hour
Easy

If you’ve been following along for a while you know that we’ve used this peel and stick vinyl tile before in my master bathroom makeover. I believe it’s a great product that can quickly transform a space on a tight budget. In fact, my mother-in-law loved it so much, she wanted to install a peel and stick backsplash in her kitchen.

As you know, we love to create a custom look without spending a lot of money. However, it’s also important that the product be durable enough and that it looks good over an extended period of time. In fact, in a few weeks we will share a post of how this peel and stick vinyl tile has held up in my bathroom. Be sure to watch for that, if this is a product you are interested in using.

So, scroll on down and see how we transformed her kitchen in less than an hour for less than $100.

This post contains affiliate links for your convenience. As an Amazon affiliate we earn from qualifying purchases. See our disclosure for details.)

There are a variety of peel and stick backsplash options available. In particular, today we are using Snazzydecal vinyl tile stickers. In fact, these are the same type of tiles we used in my bathroom makeover last year. Which dramatically changed the look and feel of our bathroom, bringing it into the 21st century.

These vinyl tiles are a self-adhesive vinyl film. The tiles are printed with the most cutting edge printing technology with a lamination that seal all color within the films to make it super durable and scratch resistant.

In addition, the material is a commercial grade heavy duty vinyl, that’s used for outdoor signage and vehicle wraps.

In fact, the vinyl tiles are fully waterproof as long as the surface is smooth.

Additionally, it is important to note that the surface be non-porous and smooth for the adhesive to work well. It must have full contact on the surface to avoid peeling over time.

As a matter of fact, you’ll be seeing more of these vinyl tiles in my home soon. It’s definitely a great way to update ugly tile on a budget.

These tiles are renter friendly. In fact, they can easily be removed without leaving any stick residue.


Before installing this peel and stick backsplash, you’ll want to make sure the surface is clean and free from grease or oils that are common in a kitchen.

Clean the wall or tile surface first with a degreasing product like TSP or Dawn. We first washed down the wall with a little dawn and water. This will ensure that the vinyl tiles adhere well.

So, let’s start to install the tile.

First of all, these tiles can be printed to your custom size. In fact, our tiles were printed to the exact height of the backsplash. That means no waste, no trimming.

We chose to have 4 tiles printed per piece with a grout line. They could have been printed as one large tile as well. The choice is yours when you order the tiles.

Today we are installing the vinyl tiles directly on the wall.

They can also be install directly on an existing tile. If that’s the case, you will want to have your tiles printed to the exact size of the tile you are covering.

For this peel and stick backsplash there are a few obstacles we will need to cut around.

Therefore, we placed the tile into position and marked with a pencil the location of the outlet.

Actually, the tiles are easy to trim and cut. We just used a straight edge and an Xacto knife. But, they can easily be trimmed with scissors as well.

While installing the vinyl tiles in my master bathroom, we found it helpful to use a paper trimmer too.

Once the tile has been trimmed, make a dry fit and see if you need to make any adjustments to the cut.

To install fold back the backing 1″

Then, align your tile, once it’s straight, press the area where the backing is lifted.

Next, take a straight edge, like a ruler and smooth out the vinyl tile while slowly pulling the backing off.

This will ensure that you don’t have air bubbles and that the tile is adhered well to the surface.

If you do find you have an air bubble, pull back the tile and smooth it out again using a straight edge. Or if it’s close to the edge, work it out with your fingers.

Another obstacle you may come across while installing a peel and stick backsplash is a microwave oven.

For this area we left the tile a little big for the cut out.

Next, we aligned the tile pattern.

Then, we used the Xacto knife to trim around the microwave oven. Using this method we were able to get a nice clean cut on an irregular surface.

Installing this vinyl tile has totally transformed my mother-in-law’s kitchen and she is loving it! Clearly, adding a little pattern took her kitchen from drab to fab!

You know we’re always curious what you think! Do you love the way this looks? Is this something that you would install in your home?

Do you have any budget saving ideas you would like to share with us? We would love to hear from you!

Leave us a comment, we’d love to hear your thoughts!

Please PIN and share with your friends! Sharing is caring! If you’re new here, WELCOME! We love to meet new friends.

Say hi in the comments below, we’d love to hear from you. You can also learn more about us here.

Thanks for spending some time with us today!

And as always here at Sunny Side Design

WE HOPE TO BRING YOUR HOME TO THE SUNNY SIDE OF THE STREET!

Be sure to follow us on Pinterest for even more home decor and DIY ideas.

To see what we are working on before it’s on our blog, follow us on Instagram.

You can also find our video tutorials on our YouTube channel.

Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Sunny Side Design
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 9 questions
  • Pearl McNeil Pearl McNeil on Jul 04, 2021

    I have uneven backslash tiles how would you suggest I handle it by a. Giving existing backslash a coat of some kind to even out tiles so they are flat & even or any other ideas would be appreciate it.

    Thanks

    Pearl McNeil


  • Patty Patty on Apr 16, 2022

    Love this tile design. This is what I want in my kitchen I didn't know you could get them in specific sizes. what company did you get them from?

  • Jenna Huntington Jenna Huntington on May 08, 2022

    Can you put these tiles on wall paper

Comments
Join the conversation
4 of 26 comments
Next