How to Make a DIY Floor Pouf

Elizabeth Made This
by Elizabeth Made This
2 Materials
$30
2 Hours
Easy

Once upon a time I made a DIY floor pouf.

Many feet have been happy resting on it.

My kids have rolled on it, built forts with it, used it for pillow wars, created cozy hobbit holes and many more things. Lately, it’s been starting to come apart at the seams.

Crafty me, I saw this as an opportunity to recover it with fabric that better fits my decor now.

And for you, I’m going to show you just how you can make a DIY floor pouf yourself. This is a great home sewing project and it’s one you can enjoy immediately and for years to come.

So grab all (and I mean all) of your fabric scraps and let’s do this thing.




DIY floor pouf supplies

  • 2 yards Muslin
  • 2 yards Home decor fabric
  • tape measure
  • chalk + ruler
  • pattern paper (like this medical exam paper)
  • shredded foam stuffing, bead stuffing or fabric scraps
  • rotary cutter if using fabric scraps
  • sewing pins
  • fabric marker
  • 36″ nylon zipper or as long as you can find, but at least 22″
  • 80/12 universal needle
  • zipper foot for your sewing machine
  • tape
  • cardboard gridded mat or large rotary mat
  • seam ripper
  • pattern weights ( how to make your own pattern weights)
  • canvas drop cloth or tarp
  • hand needle and thread


What kind of fabric should I use for a DIY floor pouf?

You’ve got a lot of choices here. Technically this project falls under the category of upholstery, so you want something sturdy.


Upholstery fabrics are rated by double rubs, which basically means how many times can the fabric be sat on over and over again before it shows its age. The higher the double rub count, the sturdier the fabric.


That being said, upholstery fabrics aren’t always the easiest to find and you will pay for that quality. Plus upholstery fabrics can be beasts to handle and sew because of their weight and extra coatings they may have that make them stronger.

before
after

On to making the pattern.

shredded fabric leftovers for stuffing

Make your pattern

Unroll a length of your pattern paper. Tape it to another length to make a big square of paper.


Fold the paper in half, then fold it in half again.


Align the corner where the paper is doubled folded at the corner of your gridded mat.


Use a tape measure or ruler to measure out 9 3/8″ from the point to every point along the arc from fold to fold.


Connect the dots to form an arc. This will make a quarter circle when you unfold and cut the paper.

From the line you just drew, measure out 1/2″ from the line. This will be the seam allowance.


You’ll need this pattern piece for the top and bottom of your pouf.


Cut along the seam allowance line through all layers of paper. Unfold your circle.


Cut your pieces

From your outer fabric and muslin, cut:


Top and bottom (circle)2 from home dec fabric, 2 from muslinRectangle measuring 60″ x 16″1 from home dec fabric, 1 from muslin

You’ll notice I didn’t have you make a pattern piece for the rectangle. That’s because…it’s a rectangle.


Use your ruler and chalk to mark out a 60″x16″ rectangle. Just draw right on the fabric. Cut 1 of these rectangles from your home dec fabric as well as the muslin.


Sewing the outer cover to your DIY floor pouf

Sew the bottom to the middle section

First, fold the middle section in half right sides together and sew down the short side with a 1/2″ seam allowance.


Press open the seam.


Quarter the middle section by folding it in half then in half again. Mark the quarter marks (one of them should be the seam) with pins or a fabric marker.


Fold one of the circles in half and in half again.


Match the quarter marks of the circle to the quarter marks of the middle section with the fabric right sides together.


Lay down your zipper around the seam you’re about to sew. Mark the beginning and end of your zipper on the middle section piece with a fabric marker.


Sewing with the middle section on top, sew the bottom to the middle section with a 1/2″ seam allowance with a straight stitch. In the area where you marked for the zipper, switch to a long basting stitch.


Press the seam open.


Add the zipper

Switch your machine’s foot to a zipper foot.


Lay down your zipper face down on the wrong side of the seam in the area you marked off for the zipper.


Stitch both sides of the zipper to the seam allowance.


Flip your work over so that you’re looking at the right side. Stitch a rectangle around down one side of the zipper area, across the bottom, up the second side and across the top letting the zipper foot ride along the center basted seam you sewed earlier.

Finish off the zipper by cutting through the threads in the seam between the rectangle you just sewed to reveal the zipper. Unzip the zipper.


Sew the top to the middle section

Quarter the second circle and mark the quarter points just like you did earlier.

Sewing with the middle section on top, sew the top circle to the middle section with a 1/2″ seam allowance with a straight stitch. This time, sew completely around the circle.


Turn the outer cover through the zipper.


Sharing is caring. Share this post with a friend by clicking on the buttons below.


Make the muslin inner cushion

Follow the same process for sewing the top and bottom pieces to the middle section just like you did for the outer cushion, but do not add a zipper.


Leave about 1/4 of one of the circles unsewn to the middle section.


Stuff your inner cushion

Start stuffing your inner cushion. Work on a tarp because this part is messy. Start by stuffing the cushion with the shredded foam. Pack it in as best you can, distributing it all through the inner cushion with your hands. Add in fabric scraps as well. Stuff the cushion until it’s about 1/3 way full.


Put your partially stuffed cushion inside your outer cover so that the side with the hole is lined up with the side with the zipper. Do not try to do this when the cushion is almost completely stuffed or you might end up ripping your zipper.


Keep adding stuffing until your cushion is holding its shape really well. Then stuff it some more because it’s hard to add too much stuffing. Add a wall of polyfill around the inside edges of the cushion as the cushion starts to get close to full.


Sew up the hole

Finish everything off by threading a hand needle with a double length of thread. Tie a solid knot, then whipstitch the opening in the inner cushion closed.


Fold the seam allowances of the hole together with your hands. Poke the needle through both layers of fabric, working from bottom to top. Bring the thread around to the bottom side, letting the fabric loop between layers. Bring up the needle close to the first stitch and make another looping stitch.

Continue whipstitching the opening closed until you get to the end of the hole. Knot off the thread and cut off the excess.


Zip up your outer cushion and enjoy your new DIY floor pouf. Your feet will thank you!


Elizabeth Farr is the writer behind the Elizabeth Made This blog where she shares helpful sewing tips, step by step sewing tutorials and videos to help you explore your creativity through sewing. She has written sewing Eguides and patterns, been a featured teacher at Rebecca Page’s Sewing Summit and Jennifer Maker’s Holiday Maker Fest and her work has appeared in Seamwork and Altered Couture magazines. She also created a line of refashioned garments for SEWN Denver. When her sewing machine isn’t humming, she’s playing and teaching violin, and hanging around a good strategic board game with her husband and 4 kids.


elizabethmadethis.com

Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Elizabeth Made This
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
4 of 8 comments
  • Mervy Mervy on Apr 20, 2021

    Was the intent a super squishable pouf? Success!

    But if something approaching a professional product was intended? Sorry.


    The addition of sufficient fill, a thick foam layer and some batting would make this project look and function so much better. Making the muslin inner 'pillow', THEN measuring to make sure that the outer cover fits snuggly is the recipe for success.


    • Elizabeth Farr Elizabeth Farr on Apr 20, 2021

      squishable yes, but definitely you can always add more or less filling to your heart's desire.

  • Autumn Titensor Goodwin Autumn Titensor Goodwin on Apr 29, 2021

    Oh my gosh! I scrolled through the pics without reading at first, and it looked like you were stuffing it with movie theater popcorn! Yikes! I knew that couldn't be right.

Next