How to update a backsplash

Kristin
by Kristin
Step by step tutorial on how to update your backsplash.
Step by step tutorial on how to update a tired backsplash.
Remove whatever surface is existing. Because it was tile, the dry wall came off with it so we just cut a new piece of drywall and screwed it into the studs of the wall
Find yourself some ceramic tile adhesive or thin set
Scoop it out of the bucket with the edge of a V-notched trowel and sweep across the drywall.
Firmly press the glass tile onto the thin set.
Begin to grout.
The directions are on the back but basically you will want to pack the grout deep into the joints, but don't get any into the seam between the tiles and the counter-top. Next clean the surface with a soft sponge and water, rinsing the sponge often. Wait 30 minutes and buff off the "haze" with a clean, dry cloth until the glass tiles are nice and shiny.
Squeeze a thin bead of tub-and-tile caulk between the back-splash and countertop.
Enjoy the new look!
Kristin
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  2 questions
  • Mary Mary on Jan 12, 2017
    Hi there - how did you finish the edges to the right of the sink? both on top and at the end where it meets the painted wall? Did you use caulk there as well?
  • Debbie Debbie on May 09, 2018

    do they make paintable tub and tile caulk?


Comments
Join the conversation
2 of 7 comments
  • Victor Resendiz Victor Resendiz on Sep 09, 2020

    The question i have how do you put the outlets back do you get anew outlet box that extend out more or longer screw?

  • Jenny Jenny on Oct 15, 2020

    One of the best surfaces to tile over is tiling. As long as they are firmly fixed there is no need to remove them.

Next