Under The Counter Pull Out Pots And Pans Rack

Tanya Marie Davis
by Tanya Marie Davis
So, I saw this pull out pots and pans rack on facebook, and immediately wanted it! I was getting ready to be installing my new countertops that I made from barnwood and would have a big empty space right next to my stove-perfect space for one of these! This one, however, was almost $200!! I knew I could recreate it for a lot less!
The one I saw on facebook for almost $200!


Things you will need:


Set of 24" Heavy duty drawer slides


2- 1"x3"x24" finished pine boards


Plasti-Dip spray paint in color of choice


8 screw in hooks-ceiling hook #4 3-7/8"
Measure to find center line and mark it. Then measure to space hooks out evenly. I started and ended my hooks at 1" from the end and spaced the 3" apart except the last 2 spaces are 3.5" to accomodate for bigger pots.


Then drill holes at each loaction for the hooks using a drill bit that is just a bit smaller than the hooks threads.


Next attach the drawer slides to the pine board so that the smaller part of the slides is on the board.
I used Plasti-Dip spray paint to paint the hooks so that they don't acratch my pans!


Install the hooks into the predrilled holes in the pine board.
Attach the second pine board to the underneath of your countertop and attach the big slide of the drawer slides to that pine board under the countertop!
Voila! I love it and it only cost about $35 to DIY it! I will be adding a knob to the front of it and somehow covering that ugliness from the slide mechanism later!
Frequently asked questions
Have a question about this project?
3 of 7 questions
  • Sharma clemens Sharma clemens on Apr 27, 2018

    Do you need to take the slide apart from each other and if so how do you do that,trying figure out how to attach to wood

  • Jonathan Dawrant Jonathan Dawrant on Jun 17, 2019

    All around good idea. The one concern I have is using side slides in that configuration. The are not designed to be used that way. I can see that it could work but I wonder if Tanya (the author) can comment on how well they are working at this time. Still strong? Still sliding smoothly? The slides look like the 100lb ball bearing slides that you can find at most stores. Thanks!

  • Diane Diane on Jul 02, 2021

    Great idea, where are all your pan lids kept now??

Comments
Join the conversation
2 of 151 comments
  • Bhalchandra Bhalchandra on Jan 19, 2021

    I am currently making the similar one, using 90 kg Hettich slide 600 mm.Shall post image soon.

  • Jeanne Jeanne on Oct 27, 2021

    I have seen several ideas like this for some time and always end up with the question, “how much weight will it hold?”. I have Lifetime cookware and it is heavy. I doubt they make slides and lumber reinforcements that would hold up over any length of time

Next