Asked on Jun 28, 2018
Need ideas to plug a hole in my bathroom countertop
+2
I will be removing the filtered water faucet to DIY a concrete countertop, but I don't know how to plug the remaining hole to make this work. Any ideas?
5 answers
-
![John Everett]()
John Everett
on Jun 28, 2018
You could put a soap dispenser in that spot, or get a plug from your local hardware store. -
![William]()
William
on Jun 28, 2018
Get a wood dowel that will fit the hole tightly. Or get one that is slightly oversize and whittle it down to fit the hole tightly. Cut it a little longer then the countertop depth. Slather it with wood glue and slip it in the hole until it's snug leaving some above the countertop height. Once the glue dries use a saw to cut it flush with the counter. -
![DD]()
DD
on Jun 28, 2018
Hi Gretchen these come from Home Depot but I am sure you can find some in other hardware storeshttps://www.homedepot.com/s/sink%2520hole%2520cover?NCNI-5 -
![CJ]()
CJ
on Jun 29, 2018
Gretchen,I'm not sure what you want to do. Do you want to permanently fill the hole or plug it while you do the concrete coating then remove the plug so the filtered water tap can go back in? -
![Gretchen zimmerman]()
Gretchen zimmerman
on Jul 02, 2018
no...I am wanting to fill the hole securely, so that I can do a diy concrete treatment over it to make it appear that it was never there.
John Everett
on Jun 28, 2018
William
on Jun 28, 2018
Sign Up to Answer
