Bathroom Vanity Redesign Using Retique It Chalk Paint and Prima Moulds

This is the vanity I purchased on marketplace, I liked the look of the piece and the granite top but wanted to give it a redesign. To prep this piece I scuff sanded it with 100 grit sand paper then wiped it down with denatured alcohol.

After prepping this piece I painted the first coat of Retique it Chalk Paint in Old Linen. I painted straight over the hardware since I will be coming back with wax to highlight those areas.

For steps 2-3 I painted two additional coats of Retique it Chalk Paint in Old Linen and made decorative moulds using Redesign with Prima Moulds and Hot Glue.

For this step I used hot glue and Redesign with Prima Moulds to create these decorative pieces. Once the glue has cooled, these pop right out of the mould. To apply the moulds I use E6000 glue.

For step 4 I painted over all of the decorative moulds with Retique it Chalk Paint in Old Linen

I used 100 grit sand paper to lightly distress the edges and corners to give this piece an old world look.

To make the decorative moulds as well as the details on this piece pop, I used Redesign with Prima wax in black and bronze to accent these areas.

To finish off this piece I applied two coats of clear sealing wax.

The vanity is finished and ready to be installed! Hope you enjoyed this redesign. To see other pieces I have redesigned check out my facebook page at Redesign by Renee Co or my website www.redesignbyreneeco.com I am a Retique it and Redesign with Prima Retailer. You can order Retique it Products by using my affiliate link: retique.com/?srrf=j4cBN