DIY Bed Crown & Crib Canopy Tutorial

by Jessica
15 Materials
3 Hours

Editor's Note: The following project is not harmful to children if done correctly and used safely. This is only intended for home decor and design, not as a functioning curtain or canopy. Please make sure to keep out of reach of children when the the crib is in use. Enjoy the creativity!

I have always loved canopy beds and one thing I really wanted to do for the nursery was hang a bed crown above the crib with a canopy that draped over the sides, but after looking into the cost of buying a Bed Crown and a Canopy I realized my eyes were much bigger than my budget, so there was NO way that was going to be possible. So after trying other ways to decorate the space above the crib I realized that I wasn't going to be happy until there was a Bed Crown and Canopy hanging there.

DIY Bed Crown and Canopy Tutorial

Since my options were limited I decided that I was going to attempt to make my own Bed Crown and Canopy and low and behold it was much easier than I thought and the end product turned out WAY better than I imagined, so I wanted to share a step by step tutorial that shows how to turn a vintage shelf and set of queen sheets into a Beautiful Bed Crown and Canopy!!

Here is what you need to make the Bed Crown and Crib Canopy

  • Ornate Shelf
  • Set of Queen Sheets
  • Ruffle Trim
  • Iron / Steam Iron
  • Push Pins
  • Fabric Glue or Hot Glue
  • Stitch Witch
  • 2 packs of Dual Lock Fasteners
  • 1 pack of Velcro Fabric Hook and Loop Fasteners
  • Scissors
  • Spring Loaded Curtain Rod Here is what you will need to securely hang the Bed Crown and Canopy
  • Plywood
  • Stud Finder
  • Level
  • Screws
  • Nails

I hope you enjoy!!

Fold your sheet in half (vertically) then cut at the fold using sharp scissors. This will create the two panels that will drape over the crib.

Separate the two pieces and then hem the edges of the sheet using Stitch Witch.

Create 3" knife pleats at the top of each of the panels. Glue the knife pleats in place using liquid glue

Iron the fitted sheet. Once you’ve ironed the wrinkles out of the fitted sheet you need to cut the bottom edges along the inseam so that the sheet is no longer fitted

Apply Hook and Loop Fabric Velcro to the top of your fitted sheet. This is so that you can attach the fitted sheet to the spring loaded curtain rod.

Adhere the pleated panels underneath the top of the the bed crown using Scotch Heavy Duty Fasteners.

Add Chiffon Trim to the edge of the curtain panels. Start by placing the top edge of the trim on the underside of the panel and then gluing it in place with a hot glue gun.

Place the spring loaded rod into the top of the fitted sheet and push the fabric together so that the entire top of the fitted sheet is on the rod. Now you need to fasten the hook and loop squares to keep it in place.

Take the Plywood and screw it into the wall where you want to hang your bed crown. Make sure that you screw the plywood into studs for stability. Next you need to hammer two nails into the plywood to hang your bed crown.

How to make a Bed Crown and Canopy

How to turn a vintage shelf and set of queen sheets into a Bed Crown and Canopy
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
3 of 19 questions
  • Lovebugznana Lovebugznana on Sep 27, 2020

    Are you not concerned if it falls it could smother your baby? Far too dangerous!

  • Ardale Ardale on Jan 02, 2022

    Well, I think it's beautiful Jessica! Once your baby starts pulling him or herself up then all you have to do is just pull the crib out from the under the crown and curtains so it can't be reached by little arms. Problem solved! I'd like to know where you bought your crown piece??? I also love this look and would like to make one for one of our guest rooms, but I can't find a crown piece affordable. I already have a canopy I made years ago around our king size bed, and it turned out really nice. I also wonder why you chose to use a fitted sheet when as far as I can tell it would be easier to make using a flat sheet. At any rate your project turned out beautiful and your imagination make a dream come true wonderfully.

  • Kathy Kathy on Apr 29, 2022

    I, too, would be interested in knowing where you got the crown part of this project?

Join the conversation
2 of 155 comments
  • Mimi Lafeurs Mimi Lafeurs on Sep 27, 2021

    It is absolutely beautiful. I had one for my child that was custom made of embroidered netting and when he got older he would pull it down all the time. I had to remove it! Lol.

  • Ami54879118 Ami54879118 on Nov 16, 2021

    With adaptations, she can enjoy the look and still protect the baby. All she has to do is to pull the crib away from the wall while the baby is in it.

    I have fears when I even see a framed picture above the head of an adult's bed. I do not approve of items on the wall above anybody's bed.

    For safety purposes, she doesn't have to use the crib ruffle pad all of the time. It can be used just for show when company comes.

    Enjoy the look with Caution. Enjoy that baby and enjoy what you have created but be wise. Gail B