Two Nightstands From One Table

2 Materials
8 Hours

Have you ever just had to buy something that spoke to you? Maybe you needed it, maybe not.

When we purchased Century View Lodge in Blue Ridge, we had to furnish it top to bottom which was the perfect opportunity to shop second hand and succumb to my need to have what spoke to me. Such was the case with one of the first purchases, a small occasional table I found at a thrift store. It was solid wood, I loved the legs, and I knew it could be used as an end table or nightstand. Plus, who can argue with $20?

After we purchased a few more items, I realized that the direction I needed to go would be a little unconventional. I decided to make two nightstands out of the one table for our Toccoa Suite. It was not rocket-science and this concept can be applied to any size table. So, if you find yourself with a similar item that you want to make smaller or turn into two matching pieces, here is how to go about it.

Using a circular saw and straight-edge clamp, cut your table in half.

At this point you will notice that you have two tables that can’t stand. Time to make more legs. You may have noticed before that on furniture that goes against a wall, in particular, often, the legs in the rear are straight or a simpler version of the front ones. In my case, I wanted the legs curved but did not have the skills to make the carved detail present in the original table.

If you want to make yours similar to the existing legs, trace the original legs onto lumber that matches their dimensions then cut them out with a band saw or jig saw.

To make the legs all uniform and to speed up the sanding process, tape all of the legs together and sand the whole unit at once.

Using a Kreg pocket screw jig, attach the legs to the side of the table at the top.

For stability, attach a cleat on the inside.

Add a cross piece at the bottom so legs don’t wobble. Use pocket screws to attach it to the legs. In my case this was very necessary so I could keep the decorative piece that was part of the original design.

Sand the table for finishing.

Paint and/or stain the table.

Get glass cut to protect the top. This is definitely optional but a great idea for a short-term rental.

Ta-dah! Done!

I love these little nightstands because besides being cute, they are low profile and light weight. So, when we need rearrange the furniture to make the king bed into two twins, it’s super easy.

I encourage you to give this a try! Do you need a couple of desks? Find an old dining table and go to town! If you have any questions, reach out. If you want to see these in person, book a stay at Century View Lodge!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Chics With Tools by Kerith House
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
Join the conversation
2 of 24 comments