Build Your Own X-Leg Outdoor Table

Honeybear Lane
by Honeybear Lane
6 Materials
1 Day

One of my bigger and more spontaneous projects this summer was building an X-leg outdoor table. We have a nice deck with a beautiful view and we haven’t really utilized it as much as we wanted to in our house so far.

If you’re looking to build this table, make sure to read this entire post.

This table is so affordable to build. The total of all these supplies listed should cost around $90. And you have a super durable table that will hopefully last you for years to come!


The tabletop is straightforward, just a bunch of 2x6s and one 2×8 cut to 6′ and pocket holes connect it together. It’s heavy though! I had to move the legs to the deck separately from top because otherwise it would be too heavy


I ultimately followed the  plans for the X-legs from Rogue Engineer, this table designed by my friend Ashley from Cherished Bliss. So to build the legs, I followed these plans exactly.

Using two 4×4 beams cut to length on a miter, I had to mark out the exact spots for making a notch in each one. This is where you just follow those  Rogue Engineer plans because they are super clear and well marked out.

When you make a notch, you have to make a bunch of side by side cuts like this. You can use a circular saw but I prefer my trusty miter saw. Then you use a chisel and/or a Dremel/Sawzall to get all the wood out.

Put the notches together and you have an X! Secure them together with wood glue and screws.

I topped them off with a 2×4 with the ends trimmed on an angle just so it wasn’t so boxy but you could totally skip this step. I screwed them into place with 3 2 1/2″ wood screws.


I took the pipes I had and built this framework using some 2x4s. I drilled holes in the 2x4s using a 15/16th spade bit. I used some Gorilla super glue and put the pipes in the holes. Then I used a mallet to bang the framework into place so it was definitely snug. I also screwed the 2×4’s into the tabletop with 2 1/2″ outdoor screws.

This added a lot of stability to the table but you could easily make this framework using 2x4s and pocket holes rather than pipe. I just wanted to use the pipe because I had bought it and didn’t have extra 2×4.

The final step was to make the trestle, which I did out of a 2×4 and pocket holes. It was a good fit and once that was in place, that was a good, solid table. No wobbling at all!

I finished the table by staining the legs with Rustoleum Carbon Gray which matches  my outdoor couches I built. 

I LOVE my x-leg outdoor table. It’s so fun to have a place to sit and eat and enjoy each other’s company in the evening, admiring the view and feeling the breeze. 

For more DIY tutorials, visit

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Honeybear Lane
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
  3 questions
  • Dava McCall Dava McCall on Aug 28, 2019

    What color/items did you use to finish the top? Love the look of the table❤️

  • Heje Heje on Aug 28, 2019

    What color is the tabletop? Your table looks great!

  • Nancy Weldon McEntire Nancy Weldon McEntire on Nov 04, 2019

    The directions don’t say, but the pictures do not look like pressure treated wood. Can you confirm.

Join the conversation
2 of 9 comments