DIY Resin Plant Stand

6 Materials
1 Day

This post is part of a paid partnership with Alumilite, however, the thoughts & opinions are always my own & I only recommend & use products I really do love! Check out our privacy & disclosure policy.

I know what you’re thinking, you sure like to make plant stands for someone who can’t keep a plant alive. And that’s true, but I won’t get better if I don’t keep trying! Plus yall know I love a good resin project.

Lately, I have been seeing all these amazing resin projects everywhere & I decided it was time to make one of my own. This project is the perfect beginner resin project & Alumilite makes it super simple by providing lots of how-to videos on their website!


  • 2-Part Clear Coating & Casting Resin 
  • Resin Dye
  • 9” Cake Plate
  • Paint Mixer
  • Plastic Containers
  • (2) 1x2x4 Pieces of Pine
Resin Mold

  1. For my mold, I use a silicone 9” resin cake plate. This has worked in the past for me & is super easy to clean off afterward.

Mixing The Resin

2. The ratio for mixing 2-part resin is 1:1. Measure equal parts of A side & B side resin.

Equal Parts Of Resin

3. If you have a scale that is the best way to make sure you are mixing equal parts. I don’t have a scale yet so I used two plastic containers & poured the same volume of resin into each container.

Tip: If you are unsure of how much resin your mold requires, Alumilite has a calculator on their website

Mixing The Resin Together

4. Once you have two containers of resin it’s time to combine them together. Pour both into a larger plastic container & use a paint stirrer or metal mixer to combine them well. 

         Tip: Pour a small amount into an extra container to use later

Extra Resin

  Tip: Pour a small amount into an extra container to use later

Adding In The Dye

5. After you mix both parts of the resin together it’s time to add the dye! I used the Alimilite Ocean Art set. It has the prettiest blues & is the perfect resin set for wavy looking resin design.

Resin Coloring

This is not an exact science play around with the dyes until you reach the color combination you want.

Filling The Mold

6. Now that your base color is done pour the resin into your silicone mold. Once it has settled its time to add your second layer design. This is the resin you set aside, I added the white dye to the extra resin & poured it into the mold for a wave effect.

Heating The Resin

7. Once you have all the resin added it’s time to heat it a little bit to add texture to the design & also get rid of the bubbles. I used a heat gun but some people use a torch to accomplish this. Justin & I have a no torch policy at our home because we can’t be trusted with that type of thing 😉

Let The Resin Set

8. After the resin is heated it’s time to let it set, I let mine set for a full 48 hours because it was a bit thicker & I didn’t want another concrete fail incident.

Taking The mold Off

9. When the resin was completely cured (48 hours later) I simply took off the mold & the resin was ready to go! I did sand the edges with a 220 grit sanding block.

Making The Resin Plant Stand



Cutting The Legs

10. For the plant stand, we are going to use 1×2 pieces of pine. Cut 4 pieces at 1 ½’ these will be the legs. Next cut two base pieces at 1’ a piece.

Attaching The Base & Legs

11. Start by attaching one of the base pieces to two of the legs. Use wood glue & nails to attach them.

Make sure the base is level
Cutting The Second Base

12. For the second base cut off 1” off the end then cut the remainder in half. It will make sense in a minute I pinky promise!

Attaching The Second Base

13. This one is just a little bit trickier. One side will be nailed in from the other side of the long base. The other side will need to have nails added at a diagonal angle.

Filling Nail Holes & Painting

14. Keep in mind if you plan on staining your plant stand you need to use stainable wood filler to fill the nail holes. I decided to go with black spray paint for my stand.


Yall how perfect is this plant stand?! I could not be happier with how this resin project came out. The plate reminds me of the waves at the beach & is the perfect addition to our patio. 

The Alumilite resin kit

The Alumilite resin kit was so simple to work with & has such a smooth finish. The kit includes everything you could possibly need to make an awesome resin project of your own, the possibilities are endless! 


Now the only question is, will I be able to find a plant I can keep alive… So far the only ones that are still with us are faux. Oh well, at least this plant stand will last forever!

Want to see more of my DIY outdoor projects?! Head this way!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Lia with Southern Yankee DIY
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
  1 question
  • Carolyn Carolyn on Dec 05, 2020

    Where did you you get that much resin? I have been looking forever ?

Join the conversation
3 of 5 comments