DIY Wine Rack for a Tabletop

4 Materials
2 Hours
Hi, it’s Brittany from Our Home Made Easy! I am passionate about sharing easy DIY projects around the house for other busy families.

Today I wanted to share how you can make a cute & quick table top wine rack with a Kreg Jig! It makes for an inexpensive gift.

Start with a 1" x 6" board. Cut it down to (2) 12 inch long pieces and (1) 9 inch long board.

Next, you'll make your openings on the 12 inch long boards.

Using a hole saw, center your cuts at the 3.25 inch & 8 inch marks. Repeat for both pieces of wood.
Using your Kreg Jig, create 4 pocket holes on the bottom of your 9-inch piece.

This will connect each 12-inch wood board to create a ‘U’ shape. Once you have it assembled, sand it down to a smooth finish.
My husband used a router to smooth the holes. Definitely not needed to keep this project quick & simple!
Lastly, paint your wine rack. We went with a mineral paint in a soft white color. No top coat or wax was needed. You could stain your wine rack or paint it any color.
Thanks for checking out our DIY Wine Rack tutorial!

Find more easy projects on our Facebook page, !
Suggested materials:
  • 1" x 6" Common Board
  • Kreg Screws
  • Sand Paper & Block
See all materials
Brittany | Our Home Made Easy
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
Join the conversation
 1 comment