How do you figure out compound angles?

Dan Grisham
by Dan Grisham
Answer this question
Answered
I am building a roof type area over my bar. Similar to a thatched roof on a tiki bar but using old barn tin. How do I figure out the corner angle cuts? Need to have a 90 degree corner with the roof sloping between 30 and 45 degrees.
q how do you figure out compound angles
  3 answers
Related Discussions
What to do with our livingroom ceiling?
Kathy Wilson Kathy Wilson on Jan 30, 2014

We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more

what to do with our livingroom ceiling
60
See Answers
How would I be put on these wheels ?
Ddu14198807 Ddu14198807 on Nov 04, 2016

I am planning on doing a mobile wood bench using 2x4. I have these wheels but have no clue to put them on

how would i be put on these wheels
39
See Answers
What type of hinges are used on the top of this folding table?
Tina R. Tina R. on Feb 11, 2014

Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.

what type of hinges are used on the top of this folding table
38
See Answers
Sealing/smoothing crate wood
Jessica Hill Jessica Hill on Aug 02, 2013

I am turning the sides of an old wooden crate into a coffee table top. The wood is similar to pallet wood: unfinished and prone to giving splinters. How might I go ab... See more

sealing smoothing crate wood, The crate in question
27
See Answers
Ideas for reworking our full size headboard to our new king size bed??
Bbe2004690 Bbe2004690 on Jan 24, 2016

We have a head and foot board from a full size bed. We want to somehow put the two pieces together to make a King size headboard. We don't need a foot board any more.... See more

ideas for reworking our full size headboard to our new king size bed
27
See Answers
How can I raise the height of this vanity?
Christine Anne Christine Anne on May 14, 2015

I bought this lovely antique piece, but it's too short for an average adult. Can I safely add castors to the bottom of the feet or might they split? Any other ideas t... See more

how can i raise the height of this vanity
23
See Answers
Looking for rings around 27 inches in diameter that can hold weight...
Ileen Stephens Ileen Stephens on Aug 28, 2016

The rings will be sat on so preferably I'd like them to be able to hold around 200 lbs. I could possibly settle for around 150 lbs. I have looked at Home Depot, Hobb... See more

looking for rings around 27 inches in diameter that can hold weight, I did not make this chair This is just an example of what I want to make The two large rings are what I am in need of
22
See Answers
About Privacy Terms Guidelines Media Support Advertise
© 2023  Hometalk.com By Hometalk Inc.