What kind of a saw are you using? Do you need to cut just one piece of wood or many? There are angles you can use or saws made for this. Peruse the hardware department of a big box home improvement store.
Use a chop saw. Or miter saw. You may need to verify on some scrap that the cuts are true. If not you will need to calibrate the saw which I do not know how to do
I would like to know what degree of angle I need to cut 10 ft. long 2x6 rafters to meet correctly with the floor and the 2x6 ridge board in a true A-frame (shingles f...
See more
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a...
See more
Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.
We have a head and foot board from a full size bed. We want to somehow put the two pieces together to make a King size headboard. We don't need a foot board any more....
See more
I am turning the sides of an old wooden crate into a coffee table top. The wood is similar to pallet wood: unfinished and prone to giving splinters. How might I go ab...
See more
I bought this lovely antique piece, but it's too short for an average adult. Can I safely add castors to the bottom of the feet or might they split? Any other ideas t...
See more
What kind of a saw are you using? Do you need to cut just one piece of wood or many? There are angles you can use or saws made for this. Peruse the hardware department of a big box home improvement store.
Use a chop saw. Or miter saw. You may need to verify on some scrap that the cuts are true. If not you will need to calibrate the saw which I do not know how to do
small pieces can be cut with a $15 miter box and hand saw - https://www.homedepot.com/p/Stanley-Deluxe-Miter-Box-with-Saw-20-600D/100034395
The bigger pieces will need a power tool type saw.