How to quickly and easily make a 48" round table?




Need it to seat 4 extra folks
Related Discussions
What to do with our livingroom ceiling?

We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
How would I be put on these wheels ?

I am planning on doing a mobile wood bench using 2x4. I have these wheels but have no clue to put them on
What type of hinges are used on the top of this folding table?

Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.
Sealing/smoothing crate wood

I am turning the sides of an old wooden crate into a coffee table top. The wood is similar to pallet wood: unfinished and prone to giving splinters. How might I go ab... See more
Ideas for reworking our full size headboard to our new king size bed??

We have a head and foot board from a full size bed. We want to somehow put the two pieces together to make a King size headboard. We don't need a foot board any more.... See more
How can I raise the height of this vanity?

I bought this lovely antique piece, but it's too short for an average adult. Can I safely add castors to the bottom of the feet or might they split? Any other ideas t... See more
Looking for rings around 27 inches in diameter that can hold weight...

The rings will be sat on so preferably I'd like them to be able to hold around 200 lbs. I could possibly settle for around 150 lbs. I have looked at Home Depot, Hobb... See more
Hello Kathie, you can cut a 48" circle from some pressed board for the tabletop and use 2 x 2s cut to the same length to make the legs. The pressed board isn't the prettiest but no one will know if you add a table cloth.
Hi Kathie,
Here are plans for a version of a round table, more complicated than Michelle's, but could also work if you have boards handy.
https://howtospecialist.com/finishes/furniture/how-to-build-a-round-table/
You could cut the circle from a piece of plywood and add hairpin legs. You also may want to check your local sale sites like Marketplace. Tables come up for sale all the time.
Another idea: try your local buy and sell. I got a 48” table for $20 on there. You can make something for that cheap!
Here are plans for building a round table
https://www.hometalk.com/diy/living-room/furniture/round-dining-table-build-with-only-300-in-tools-and-materials-32705972
Here are ideas for building tables. You can build a base to fit a round table top you cut and build
https://www.hometalk.com/search/posts?filter=build%20round%20table
Round Dining Table Build With Only $300 in Tools and Materials
You can make a table base quickly by using plastic pipe aand plastic fittings vailable at home improvement stores. Then simply purchase a 48" round of pressed wood and place on the base. This can be disassembled easily and stored for another time.
You might also be able to some type of furniture the appropriate height and just add the 48" round. Enjoy!
it would be cheaper and easier to buy a round card table or square card table than making one I would think they have sturdy white round tables at Walmart, HomeDepot, Costco, etc
https://www.youtube.com/watch?v=4bd37Pazofk
A pedestal with the table top mounted on it would be the best to accommodate for extra seating.
Easiest way is to go to a local thrift store buy a table and throw a table cloth over that.
Home Depot and Lowes sells round table tops, you can add legs or a pedestal. Stain with minwax and seal.
Hi Kathy: I'd hie myself down to a local thrift shop (or check Face Book Market Place) and see what they have, or maybe a folding card table. If you are having a party, you are, most likely, up to your eyeballs in work already, and you would have to deal with this extra table forever :) The card table will fold up and can be tucked away. If you are going to make a table, I'd do a square one, it takes up less space and eliminates bumped elbows :) Here is Home Depot's site for table legs: https://www.homedepot.com/s/how%2520to%2520make%2520a%2520table?NCNI-5
You can buy a round or square top there, too
The round tops are rather pricey, and you can use a piece of plywood for a square or rectangle table. They will cut the wood to size for you, too :)
You can buy a round or square top there, too
Good luck and happy Thanksgiving
Hello I might consider purchasing a table round or making one….and putting it on a folding table
If you want a "quick" set up, do you know someone with a round patio table? Throw a pretty cloth over top and you're done!
It might be easier and less expensive to check Facebook Marketplace, Craigslist (even their free section), or your local Buy Nothing group. If you build one, which you can do by cutting a big circle out of a sturdy material, just make sure the legs are sturdy so it doesn’t all fall apart on you.
Hi there Kathie! You can try cutting a 48" circle from a piece of wood, then just add hairpin legs. Or you can also buy from your local buy and sell.