DIY Hanging Planter
This super simple project transformed boring, frumpy plastic hanging planters (that I picked up for $3 each at my local hardware store) into hanging planters that are more my style! The whole project only took a couple hours – and I’m in love with how they turned out!
I started with these super basic, not particularly attractive plastic hanging planters.
I removed the plastic hangers (they were just clipped on to the pot), and spray painted the pots white.
Then, I took a piece of twine and cut it to twice the length that I wanted my plant to hang. I folded the piece of twine in half and inserted the two ends upwards into the holes in the pot that were from the plastic hangers (that I removed earlier). I cut three more pieces of twine and did the same thing on the remaining holes.
Once I was done pulling the twine through the holes, I gathered all the ends at the top, and tied them together with an overhand knot.
I put in faux ferns from Afloral. I ended up putting 4 fern bushes in each planter, and it worked out perfectly!
I hung the planters in my screened in porch, and I just love them!
This DIY was the last finishing touch I wanted to put in my screened-in porch to complete my makeover for the room! You can see the whole "Screened Porch Makeover" here!
Want more details about this and other DIY projects? Check out my blog post!
Published August 8th, 2016 9:39 AM
2 of 105 comments