Super Easy DIY Raised Garden Bed

Jason Lee
by Jason Lee
45 Minutes
If you have basic hand tools like a saw and a hammer you can build a simple, functional raised garden bed out of common lumber found at your hardware store. Modern treated lumber is safe for garden use, unlike in the past, and is weather resistant. This will keep out turtles and slow down weeds from overtaking your plants.
Purchase the following materials:

(6) 2"x6"x8' pressure treated boards
(1) 4"x4"x8' pressure treated post
nails or screws (at least 2-3" and rated for outdoor use)
garden soil or top soil with amendments of your choice
The Materials
Cut two of the boards in half to make four 4' lengths. Cut the post into four 2' lengths.
Using the posts in the four corners, nail or screw the boards to the posts so that there are 2 boards on each side.
Dig 4 holes where the posts will go and put the bed in place. Backfill any holes with dirt.
Fill the bed with your garden soil of choice.
Enjoy your garden!
Frequently asked questions
Have a question about this project?
3 of 8 questions
  • Diane Arsenault Diane Arsenault on Mar 03, 2019

    Is this deep enough for roots of plants. 12" doesn't seem like enough. I want to plant tomatoes, zucchini and cukes.

  • Ron Ron on Mar 07, 2019

    Do you till the ground where the bed will be covering?

  • Ron Ron on Mar 07, 2019

    Do you till the ground where the bed will be laid?

Join the conversation
4 of 44 comments