Creepy 3D Halloween Mirror

10 Materials
3 Hours

This mirror was inspired by one I made last year for Halloween. The one I made last year had a skull on the mirror surface which I added using waterslide paper. One of my followers said, it would look really cool if the skull could look like it was coming out of the mirror. With this in mind, I came up with this 3D Halloween mirror. I also wanted to add some lights to the inside of the skull to add to the creep factor of the mirror. This creepy Halloween mirror will look great all lit up on your porch to thrill or scare the trick or treaters.

Any mirror will work for this project, but this style will look better. I painted the frame with black gesso and highlighted the raised edges with gold wax paste.

This can be washed off after Halloween or you can seal it with Acrylic spray if you want to keep the look.

Making the 3D skull

To make the skull I used a Halloween jelly mould and some epoxy resin. I had this idea in my head that I wanted the skull to light up on the mirror.

I had no idea if lights would still work once they were set into the resin. So as an added precaution I also added some glow in the dark powder. So if the lights failed it would still shine up. You can use battery operated fairy lights. They are only a couple of dollars at the budget stores.

Add the lights

Spread the lights out over the inside of the skull. I made my first mistake here by not leaving enough wire to hide the battery box behind the mirror. And mistake number 2, I did not check the colour of my lights. I wanted red, but added the blue.

Add the resin

I wanted the mirror to look cool during the day too, so I needed to hide the wires inside the resin. So I added a few drops of red colour pigment to the resin.

You leave the resin to dry as per manufactures instructions. All resins are different, but they seem to be round about 12 hours.

Pop the skull out of the mould and paint it black with acrylic paint or black gesso.

Making the 3D hood

To make the hood you need some craft glue or fabric stiffener, they both work great. And some scrap black fabric, I used an old t shirt.

Place the skull where you would like it and cover it with saran wrap. This is to stop the glue sticking to the mirror and skull, and also prevent lots of cleaning up after.

Put some glue or stiffener into a bowl and add a small amount of water and mix well. Then you can dip your fabric into the glue, try cover all the fabric in glue.

You can now arrange the hood around the skull how ever you like. It will be a bit floppy at first but as the glue dries you can add more detail to the fabric.

I had to pop out unexpectedly before mine was dry. I just grabbed items I had laying around my craft room to hold it in place while it dried. It takes about 2 hours to dry or less outside in the sun.

To give the skull some added character, I used some bronze wax paste and rubbed some over the surface.

The hands are ones I use every year, you buy them as a bag of bones in the budget store. I painted them black and added the wax paste to the surface. I used hot glue to stick them all to the mirror.

To solve my second problem with the short wire. I covered the battery box with fabric and added a spider.

And that is my creepy 3D Halloween mirror completed.

My cost for this project was low because I used items I already had at home. I also used very small quantities of each item, so it is very hard to cost.

More detailed instruction on this and other projects are available for free on my website listed below.

More DIY Projects

This Halloween goblet centerpiece was made from a wine glass and elements made using silicone moulds and hot glue.

How about making a spellbook for Halloween or that Harry Potter fan in your like. This spellbook was made from a recycled book.

This was last years mirror, instructions are on my website if you would like to try it out.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Unique Creations By Anita
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
3 of 7 questions
  • Maude  LaFountain Maude LaFountain on Oct 08, 2020

    That is super cool !!!..... I love it ........I have white Gesso but not black can I add craft paint to it or maybe Black Food Coloring?....And How did you get the saran wrap off and did you Hot Glue the Hood to the mirror ?...Very creative I love it !!

  • Kris East Kris East on Oct 07, 2021

    You're an amazing artist!

  • Richard Richard on Aug 10, 2022

    What is your website?

Join the conversation
4 of 42 comments