My Version of This Challenge
by Judi
4 Materials
3 Days
Medium
I decided to change it up a bit! but the first picture is my inspiration!
This was my inspiration for my PB knock off
i took an old fence slat, to work on my project.
The picture above showes a full size glad, but I decided to make mine a little different. So the next thing I did was cut 6 pieces into 7x7
squares, and sanded them!
next thing I did was gave them a beveled edge! Not sure if you can see it!
Then I prepared the squares for the strips
Then took each square and painted the red stripes then the white strips on each square
5 for the stripe part.
On the 6th square I painted it blue the I cut out a star, painted that white, I let that those dry, then a arched the star to the blue square. Once all the squares were painted and the star was attached and dried! I brushed on a little stain to give it that vintage look!!
And here is the finished product! Total size is 42 x 14 ! I think this came out really good!!!
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Comments
Join the conversation
2 of 14 comments
-
Great job!
-
If you didn’t attach the finished squares to anything first , then y ou would need to hang each individually
Frequently asked questions
Have a question about this project?
So beautiful. Did you stain the entire piece or just the unpainted areas?
So beautiful. Did you stain the entire piece or just the unpainted areas?
Did you attach the squares to anything??