Simple Colored Concrete Easter Bowl
In just four simple steps, you can make this Fuschia colored concrete bowl!
This colored concrete easter bowl is super simple to make at home. If you’ve been waiting for an easy one to get started, this just may be the one.
Even though this is a great Easter craft for adults, it is also a perfect one to do with kids.And what’s a better way to decorate your home, than to do it with your own handmade goods?
I guarantee your neighbors won’t have this unique and beautiful concrete Easter bowl on their tables.
STEP 1 | MIX AND COLOR THE CONCRETE
The beautiful thing about this project is that you don’t need to fuss with the molds. The two plastic egg halves for the concrete Easter bowl are ready to go.
First mix the dry mortar mix with water. If you are using the white mortar mix, then you will need to make the mix a little thicker than you might with a regular cement.
This mortar mix can’t handle too much water, so mix it to a mud pie consistency.
Once the lumps are gone, go ahead and add the powdered dye to the concrete. I probably added just ½ of a teaspoon.
If you add more and the dye color doesn’t get deeper, then you’ve hit the maximum concentration of color.
**If you love making concrete projects, then check out my Pocket Guide to Concrete Mixes! I tested 6 mixes and made a handy reference chart. It's a FREE download. 😉
STEP 2 | Cast The Concrete
Add the concrete mix to the bowl. Just scoop it up and drop in the bowl.
Though I didn’t use a board here, I normally like to use a board underneath my concrete crafts when casting because it helps with vibrating the bowl or other crafts.
Before adding the inner egg mold, go ahead and vibrate this now. If you don’t have a board, then just tap the bowl on the table and tap the sides for a minute or two.
Now go ahead and add the top/inner mold and press it as far as it will go. You can see in this photo that the top (clear) mold is slightly larger than the bottom mold.
The inner mold will stop automatically with just enough space at the bottom to provide a proper thickness of ¼ – ½”. Something to note, where the two edges come together, the edges will be thin.
This is fine, just wipe off the excess and just be aware that the edges may be brittle when you demold.
The lid will slide out of place, so add moist play sand to weigh it down. I like using sand because it will keep the inner mold weighted evenly so your cast piece doesn’t become lopsided.
This mix needs 24 hours before it can demolded, so let this cure overnight.
STEP 3 | REMOVE THE CONCRETE EASTER BOWL FROM THE FORM
**And by the way, if you like this tutorial, then you may want to check out my Cement Egg Planters! 😄
This should be easy to demold and you may even be able to pull the top right off.If so, then flip this over onto a soft towel and try to gently shake the bowl out.
Keep the bowl close to the towel so it doesn’t break when it comes out.
If it doesn’t release easily then use a heat gun ( a hair dryer will probably also work for this mold) and run it back and forth over the outside bottom of the outer mold. It should release the concrete within a few seconds.
FINAL STEP | SAND THE EDGES OF THE CONCRETE EASTER BOWL
Use the 220 grit sandpaper to clean up the edges. Remember that the thin edges may be brittle, so work gently.
Don’t sand the other parts of this bowl or you may scuff up the surface. Since the plastic was so smooth, the rest of the concrete easter bowl should be smooth as well and not require sanding.
Enjoyed the project?
Resources for this project:See all materials
Frequently asked questions
Have a question about this project?
Join the conversation
Goldbeargirl on Mar 07, 2021
I love this idea - ty for sharing! Will use as a candy dish
Great idea but where on earth do i get an egg shaped bowl in my neck of the woods?
This is so cool! I wonder if you have ever made a concrete egg to put in an outside garden? I’d love a tutorial on that. Thanks!