Tissue Box Challenge - Spooky Lantern
I was inspired for this week's challenge by a large tissue box that I was just about to throw away. With Halloween just around the corner, an idea for a lantern came to mind...
My tissue box in its original state (before the haunting).
Tools and Materials
- Empty tissue box
- Pattern pieces
- Tissue paper
- Foam core
- LED light
- Plastic charger
I trimmed out the opening so that there was a 1/2" border all around.
I planned out and made pattern pieces for everything I was going to have to cut for this project. I wanted to cover the inside and outside with card stock for appearances and also stability.
I also cut out pieces of tissue paper that would be used to make the lantern front panel. This included a red moon and a larger red halo, white strips for fog, and two white rectangles that fit the silhouette panels.
One of the panels has a black sparkle side - this will be the front. I applied the white tissue to each of the panels after I laid them out in opposite directions. The front panel is on the left and the back of the front panel is on the right. It is the right panel that will be decorated with the various pieces.
Beginning with the pieces that will be furthest back, begin layering your scene. I used glue, but only in areas where it would not show through.
This is the completed scene in layers.
Once the layers were done, I adhered the front panel directly over the back panel, being careful to match up the edges perfectly.
I then covered the inside and outside of the box with the card stock I had chosen. I also had cut two squares of black foam core for the base and top and applied them.
I snipped the top and bottom of one front edge to form a makeshift hinge for the front panel.
I applied the panel to the "hinge". This way, I can get in and out to turn the light on and off. To keep the panel shut, I just use a glue dot at the top and bottom of the other side of the panel.
This is the lantern unlit. I placed it on a plastic charger and added a few decorations with hot glue.
Here it is with the light turned on. It's just an led pop light sitting on the inside bottom of the lantern.
More detail of the lit up panel.
Copy my scene or make your own! Let me know what you come up with in the comments down below!
Enjoyed the project?
- Card stock (Michael's)
- Tissue box (my closet)
- Tissue paper (my closet)
- Silhouette patterns (internet)
- Black foam core (Michael's)
- Halloween decor (Michael's)
- LED light (Home Depot)
Frequently asked questions
Have a question about this project?
Join the conversation
Carol Cole on Nov 04, 2018
FANTASTIC, it is wonderful.
Som53096189 on Sep 24, 2021
Holy crap that's amazing!!
how do i find out about the weekly challenge?