Dogie Feeding Tray
I made these dogie feeding trays out of upcycled wood(pallet wood)
These dog trays are made out of %100 recycled pallet wood
1st i took a pallet board and measured it 22 x 18(22 inc long by 18 inc wide) and then i put a dog bowl on the to upside down and traced the outline
Then i cut the bowl out line an 1/3 in not on the line itself
then i cut the bone legs out of pallet wood i used a template to trace the bone and i cut them out with a jig saw
then i sanded everything down with 80 and 120 grit sandpaper
Then i glued the bone legs on to the trays using gorilla glue and 2 inch nails
Then i stained them with an oil base stain to protect the wood from water .I use a red cherry on this 1
Then i added the bowls after they dried
This 1 is a red Mahogany
Then i added 4 hooks 2 chains to hold the hooks and a bone that i cut out for the name plates .Then there you have a dog feeding tray made out of recycled pallet wood
Enjoyed the project?
Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Published December 19th, 2017 6:26 AM
Join the conversation
William on Dec 19, 2017Really cute. A lot of Hometalkers ask about raised dog feeding stations. These are great.
Frequently asked questions
Have a question about this project?