DIY Concrete Candlestick Holders For Fall

17 Materials
2 Hours

Make DIY concrete candlestick holders for fall, to decorate your home.

These elegant DIY concrete candlestick holders for fall decor are a great way to decorate your fireplace mantle or table. They can even double as Christmas decorations.

I get amused when I make things with cement and realize there is only one brand and type of plastic container that will work perfectly for my project. I get downright stubborn about using anything else when I get it stuck in my head that no other size or shape will do. 

This, of course, people would tell me is ridiculous- (I disagree) :0]. It’s an affliction, I swear it is. I could probably put out twice as many tutorials if I didn’t get so dang hung up on these things. So what am I talking about?

Smartwater bottles, of course! My poor husband always gets put on the mission of running around town for these very specific needs of mine.

What happens is that I horde away every plastic container I ever use. They go into plastic bins and are then sorted by shape, and soon they will be further categorized by size because the collection is GROWING.

And though I have countless plastic containers, it’s not uncommon for me to only have one of a certain size or shape, that I “decide” is perfect.

So I’ll run a test and if that holds true, then I’m going to need back ups because I will need to revise the tutorial, or in the case of these Fall Candlestick Holders, I’ll need a pair of them.

The good news is that these Smartwater bottles are readily available at most places, at least everywhere I’ve lived on the east coast- and I have lived in just about every east coast state. I’m guessing since Coca-Cola makes them, you can find them throughout the US.


First, cut the bottle to size. You’ll want to utilize something to act as a straightedge to help you get a straight line. Use something that comes in a roll, like a roll of acetate sheeting or aluminum flashing.

Flashing is especially good because it has some rigidity and enough thickness, it basically acts as a true straightedge, but for these, I just used a piece of acetate.

Next, place the bottle on the work surface and measure up 2 ¾”. Make this mark in a few places around the bottle. Then wrap the factory edge of the flashing/acetate around the bottle and line it up with your marks.

Use blue tape to tape the flashing to the bottle so it doesn’t slip.

**If you love making concrete projects, then check out my Pocket Guide to Concrete Mixes! I tested 6 mixes and made a handy reference chart. It's a FREE download. 😉

Now carefully score it with an X-acto, and then cut through the bottle.

Repeat for the second bottle. 

Next, we need an insert for the mold for where the candle will go. You don’t want to use the candlestick itself for this because it will heat up during the curing process and the wax will melt. 

Cut a piece of acetate sheet to 4” by 3” and roll it around the candle so that the 4” is the height. Use packing tape to tape it together. Pull the acetate down the candle so there is an inch or so of space.

Mark a line around the inner mold cylinder at 2 ½”, this will be your stopping point for when you insert it into the concrete.

I made the cylinder longer than the space for the candle because it will be easier to remove. 

Now trace the candle onto another small piece of acetate and cut it out. Glue it to the bottom of the cylinder. Next, pour sand inside and add some water to make the sand moist so that it is more firm.


Make sure the bottom is seated so that the cylinder is plumb and straight. It will make it easier to keep it plumb when you insert it into the mold.

You probably won’t need to make two of these. When I removed this from the first candlestick holder, it was fully intact and I was able to reuse it for the second one.

The only thing you may end up needing to do is to add a new piece of acetate to the bottom of the cylinder, because it may stick inside the concrete candlestick holder.


When I demolded the second candlestick holder, that bottom piece stuck to the bottom. But if this happens, don’t worry about it, it won’t hurt anything by being there and you won’t see it.

**For other great concrete and cement tutorials, check out my Concrete & Cement Crafts projects. 😉

Mix the concrete to a thick milkshake consistency and pour it into the water bottle. When it’s nearly filled, center the cylinder above the bottle and press it down, ensuring that you stop at the line you marked. 

Now re-insert the candlestick into the top part of the cylinder. It will help you be able to tell if it’s lined up straight.

Use a squaring tool to make sure you do have the cylinder standing up straight and plumb. Once the concrete has started to set, remove the candlestick and then place a small weight on top to help keep it in place. 

Let it cure for an hour or two. A longer cure will help it have a glossier surface when demolding.


Demold the candlestick holders by using a heat gun to release the plastic from the cement.

If this doesn’t allow you to remove the mold, then you can carefully cut into the plastic with a box cutter. Take care not to scratch the cement. 


Paint the candlestick holders with the gold paint for fall coloring.

Start by putting some water into a cup and dab a little bit of paint onto a paint tray, or lid of a plastic food container.

To get a paint wash technique, dip the brush into the water and then into the paint and lightly brush the gold paint, running the brush vertically. 

I created wave-like strokes toward the upper portion and then blended them. The further I went down the concrete holders, the more water I added to give it a muted effect.

If your paint looks too heavy after brushing it on, just add more water and blend. 

Now paint the top of the concrete holder. After playing with this on a test piece, I chose to make the top muted, like the lower portion.


I have found that the sealers that have a better sealing effect tend to make the concrete darker. So you may want to consider not sealing the entire candlestick holder.

Put some sealer in a cup and brush it on the top and just inside the top part of the hole. The sealer will help prevent oily residue from the candle wax from dripping on and staining the cement.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Artsy Pretty Plants
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
  1 question
  • Lisa West Lisa West on Sep 16, 2020

    Hi I really live this idea. It will be great c or camilies who have kids who are always in a hurry and don't pay attention in the home. Like me kids. Lol full of life. Many things got broken into home when they were teens. Any way question did you use any thing like veggie oil to help to keep the concrete from sticking to your molds? These are gorgeous to.

Join the conversation
  • Offaly Offaly on Sep 18, 2020

    I had to smile when you said that only a certain type of bottle will do. You sound like me very rigid in what you want. Are you sure you are not a little bit Obsessive Compulsive or maybe A.S.D. my daughter has said for years that I am. Just a joke. love your craft. Stay very safe with this Virus around.

    • Artsy Pretty Plants Artsy Pretty Plants on Sep 18, 2020


      Yep, totally obsessive anyway.  My own worst enemy sometimes. But you gotta admit, they are a nice shape!

  • Crafty Little Hippie Crafty Little Hippie on Sep 17, 2022

    Love it! I have SO many smart water bottles that I keep telling my husband that I need to make a chandelier or something. 🤣