How To Make A Christmas Wreath From A Plastic Tablecloth

The other much cheaper option is to use a plastic tablecloth. So, that’s what I did. I should note that I made my first Christmas Wreath from plastic tablecloths about seven years ago and it’s been on our various gates over the Christmas period for all those years. This year, I decided that it had faded enough that I should make a new one – the old one was green and red and this year, I’m feelin’ the red!

• 30cm (12”) wire wreath form
• 2-3 plastic tablecloths (see image below)
• Rotary Cutter and Mat or Scissors

This is really easy – in fact, it would be a great project for the kids. It takes quite a while, but you can do it while watching TV.

I should note that the number of tablecloths you need depends on their size and how many strips you squeeze onto each ring.

Cut the tablecloths into strips approximately 5cm x 20cm (2” x 8”). Don’t be too precious about this – they just need to be about the same size. If you have some smaller strips you can still use them, just don’t put them all together in one spot.

Find a comfy spot – you’re going to be here for a while. Take one strip, fold it in half over your finger.

Loop the folded end of the strip under the outside ring of the wreath and thread the ends through to form a cow hitch knot then pull the ends tight. Ensure this knot is pushed up close to one of the supports on the wreath.

Continue in this manner until the entire outside ring is covered, ensuring you squeeze the knots tightly together so they can’t move.

When you get to the inside ring, it’s easier to turn the wreath over and work from the other side.

I used a picture hook to hang it on the gate, but you can attach it wherever and however you like. If it’s going to be in a windy place, ensure you fix it securely.

I would love to have you stop by my blog  Living a Real Life for the full tutorial as well as sign up for my latest creations, posts, recipes, exclusives, and more...