DIY Pallet Christmas Tree + Tutorial
2 Hours
Easy
These Christmas pallet trees are a quick and simple way to dress up your front porch for the holidays. Add lights or ornaments to make your tree more festive.
DIY Pallet Christmas Tree
Cut your boards to desired length. Mine where cut at 19.5", 17",14.5 ", 12", 9.5", 7", and 4.5".
Lay your boards out and cut another board for the "trunk".
After painting the boards, lay the "trunk" down on the boards to get the spacing you want.
Pre drill holes and screw the boards to the "trunk". Use 2 screws per board.
To make your base, cut (2) 3.5" boards and (1) 10" board. Use a Kreg jig to make pocket holes in the 3.5" boards. .Screw your 3.5" to the sides of the 10" boards.
Attach the base to your "trunk" with brad nails. Enjoy!
Want more details about this and other DIY projects? Check out my blog post!
Comments
Join the conversation
3 of 80 comments
-
Made this one a few years ago and still love it!!
![]()
![]()
-
I like your trees especially the wooden one, no painting involved. Nice job, thank you for sharing.
-
-
Could use this in a room , lots and lots of ideas for one of these trees, so simple , but!
Frequently asked questions
Have a question about this project?
What is the best way to hang ornaments from this tree?