Ornate Mirror Gets an Updated Look
Mirror are my absolute favorite thing to refinish. I guess because of all that detail.. thats what draws me to them.
cleaning an ornate mirror takes so much time. I use a can of air first to get the dust off. then a very soft toothbrush to get into the details. then spray it again. then a light wipe down of water.. that's what I do (most times)! what do you do?
taped off this mirror.. but another good idea I have used in the past is to use those paint cards you get in the paint department and stick them all around. works really well!
2 coats of heirloom traditions cobblestone paint. wait a day for that to really dry... followed by a quick coat of general finishes high performance top coat because glazing was next.
general finishes pitch black glaze was applied. I entered their design challenge last year and I ended up coming up as a winner of some prizes. yay! so anyway, moving on... I usually use a chip brush to apply my glazed because im kind of rough with it and I like to really push it into the crevices. as you can see here, it's covered. next step is to wipe it back with a clean cloth.
Wow! LOOK AT THAT DETAIL and how it just pops now!?
with the glaze applied...
I sealed again using the same top coat by general finishes... then I used silver metallic wax to go over the finished product - I just applied some to my finger and basically just dragged it across the mirror. all of the raised areas would pick it up.
Resources for this project:See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Published February 7th, 2018 12:31 PM
2 of 27 comments