5 Rustic Farmhouse Chickenwire Decor Ideas
Grab some chickenwire for these easy farmhouse Fall decor ideas!
Step 1: cut down
First, grab some chickenwire and cut it down to size.
Step 2: attach
Next, create a short fat tube. To attach the tube cut down some wire and twist it to secure.
Step 3: mold
After that, mold your shape. Pinch in the bottom and press down to round it out. Pinch in the top to a point.
(it should look like the above picture).
Step 4: spray paint
Next, add some spray paint!
You can make these in all shapes and sizes! Add some fairy lights or keep them plain :)
This is the perfect centerpiece or accent to your fall mantle!
Step 1: cut down
First, grab some chickenwire and cut it down.
Step 2: roll & attach
Next, roll the chickenwire into a long skinny tube and attach it using wire.
Step 3: add pinecones
After that, add some pinecones, acorns, or other fall decor!
Step 4: cut off excess
Next, wrap the tube around so it creates a circle & cut off the excess so it doesn't have any jagged edges.
Step 5: attach ends
After that, attach the ends using wire to finish off the circle.
Step 6: add burlap
Next, add an accent bow! I used burlap but you could use any ribbon you want!
step 1: remove glass
First, grab 4 dollar store frames and remove the glass.
step 2: remove pegs
After that, clip off the pegs.
step 3: cut to size
Next, cut the chickenwire to fit the frame.
Step 4: staple
After that, attach it to the frame using staples.
step 5: trim & repeat
Next, trim any excess edges that are sticking out & repeat it on all 4 frames.
step 6: hot glue
Following that, hot glue the frames together creating a box.
Step 7: spray paint
Next, spray paint them any color of your choosing, I also distressed mine using sandpaper.
step 1: cut down
First, cut down the chickenwire.
step 2: twist
Next, create a cone shape by twisting the chickenwire.
step 3: trim
Following that, trim off the top of the cone so it's a straight edge.
step 4: add decor
After that - fill the cornucopia with some decor! I chose to fill mine with faux pumpkins and gourds but the possibilities are endless!
step 1: staple
First, staple some chickenwire to an old frame.
step 2: trim
Next, trim off any jagged edges.
step 3: measure
After that, measure the frame and create or purchase words that will fit inside it.
step 4: attach
To attach your saying - cut down some wire and pinch it in so it looks like a staple. Twist it around the ends of the letters.
step 5: add decor
Next, add some faux flowers, or other decor!
I hope this inspires you to create your own custom farmhouse decor this season!
Happy Fall! Be sure to check back for my next video!
Frequently asked questions
Have a question about this project?