LITTLE GREEN CONNECTOR MEN

Karen Merritt3
by Karen Merritt3
2 Materials
45 Minutes
Easy
Here is my second project that I used wire connectors. The first was a sunburst mirror.
The Instructional Media Center (IMC) at the university where I work was pitching these green wire connectors. I took them home to keep for a future project. It ended up there were so many of them that I made two projects.
Little Green Connector Men.
The first set of 2 connectors I glued end to end.
Glue end to end.
The 2nd set of 2 connectors I glued side to side.
Glue 2 side to side.
I took the 1st set and glued it on top of the second set.
Glue set 1 to set 2.
I glued 1 single connector on top of the 1 st set for the head.
Add connector for head.
I glued a small piece of connector to the face.
His face is added.
Now he joins his buddy.
All done. It took about 45 minutes to make 5.
Suggested materials:
  • Wire connectors   (Free)
  • Glue gun & glue sticks   (Already had)
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
3 of 6 comments
  • Karen Merritt3 Karen Merritt3 on Jul 25, 2017
    Thank you Hillela! I'm giving one to the guy that pitched the wire connectors.

  • SUSAN SUSAN on Jul 25, 2017
    These little green men are adorable! Better hold off giving one to the guy who tossed them, otherwise he may have second thoughts of tossing any future project components. 😉

Next