Mason Jar Soap Dispenser

Heather | mysweetkyhome
by Heather | mysweetkyhome
5 Materials
30 Minutes

Hey everyone! So have you seen all over Instagram these adorable mason jar soap dispensers?! Well I have as well and decided to make my own!! If you interested in the simple and easy DIY for yourself check this out!

Start by gathering your matieral. I already had almost all my supplies on hand. Depending on what you have on hand the price to make can vary. You will need a drill and drill bits to complete the project. Other materials are easily found at the dollar tree or Walmart.

First: Use your tape line and marker to determine the center of your lid to drill your whole.

Depending upon the size of your pump. You will need to find the corresponding bit. I suggested starting with the size smaller then your pump and gradually increasing the size of your bit and the hole.

You want to make sure the bit is the size of the base of your pump so the pump will sit down flush on the lid.

After you spray paint your entire lid allow it to dry. Spot place the super glue around the edge of the lid for your twine to stick to. Roll it around and when you have the desired amount of twine to cover your edges cut twine and super glue the loose end to secure. Hold down and allow to dry

Place ur pump down thru your mason jar lid and dab super glue to secure it. Mine fit very snug so I didn’t have to use super glue to secure.

That’s it! Super easy right?! Fill with hand soap, lotion, or dish liquid and style away!!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
  2 questions
  • Ginny Jo Ginny Jo on May 24, 2019

    The item in the middle of items needed, a plastic or wood item? It is to make pump higher and or better looking?

  • Lisa Lisa on Oct 20, 2019

    Hi! I’ve been making these for a couple years now but they rust so quickly, any suggestions how to prevent them from rusting?

Join the conversation
4 of 8 comments
  • Valerie Burge Valerie Burge on Apr 09, 2019

    Great tutorial! I recently bought the 'lid with pump' at the dollar store that is to fit on a mason jar. But the pump came loose after just a few days. I was wondering if there was a way for me to use what I have to make a stronger version - and you just answered my question! :) Thank you!!

  • Bernie Bernie on Apr 17, 2019

    Very cute and easy too! Nice job!