Pineapple Light From Plastic Spoons

Julien K., Hometalk Team
by Julien K., Hometalk Team
10 Materials
2 Hours
Create your own playful pineapple table lamp using plastic spoons, a water bottle, some paint and glue. It will add a playful touch to any room while providing light at the same time.

We want to help you DIY, so some of the materials in this post are linked to sellers. Just so you know, Hometalk may collect a small share of sales from the links on this page.


- Plastic Spoons

- Large Plastic Water Bottle

- Hot Glue Gun

- Hot Glue Sticks

- Spray Paint. I like the Rustoleum spray paint. You can buy an assortment of colors on Amazon.

- Xacto Knife or Scissors

- Light Fixture Cording

- Chandelier Lightbulb

Step 1: Cut your water bottle.

Cut your water bottle into three separate pieces: top, middle and bottom. The top portion, and the bottom piece are the only ones you will be using, so you can go ahead and recycle that middle portion. The top section is the piece that matters most, so be sure to cut it to the desired height you'd like your light to be. Mine was about 6" tall.

Cut off the top nozzle from your water bottle. You will not need the nozzle.

Step 2: Pierce a medium-sized hole into the center of the bottom piece of the water bottle. Ensure it is large enough for the light plug end to fit through.

Step 4: Tape the bottom to the top.

Using scotch tape or heavy-duty clear tape, stick the bottom portion to the top piece, as if you were recreating a short water bottle. Then, cut the nozzle off the top portion of your water bottle. You won't need this part.

Step 5: Paint your plastic spoons.

For this project, you'll need to break the heads off of the plastic spoons. Snap the base from the handle and put your handle portions off to the side. I chose to spray paint my spoon heads three different colors to create an ombre effect. You can choose to paint it all one color - or be ambitious and paint every piece a different color. Have fun with it!

Just remember, however you paint your spoons will appear differently when the pineapple is lit up. Brush strokes, splatters and other effects will be visible when the light shines through each piece.

My first color was a turquoise.

My second color, a sky blue hue.

My third color, a dark blue hue.
I love the ombre look of these colors. Rustoleum has a bunch of different shades and colors. You can check out a number of them here. 

Step 6: Paint the handles of your spoons.

I chose to paint my handles the darker shade of blue. The handles will create the spiky portion of the pineapple.

Step 7: Glue your spoon pieces to your bottle.

One by one, use your hot glue gun to adhere each piece to your water bottle base. Hold each piece down for atleast 5 seconds to ensure it bonds well to the plastic water bottle.

Continue gluing on each spoon piece to the water bottle. Do not glue any pieces on to the bottom of the bottle, just the sides.

Step 8: Insert your cording.

Take your electrical cording and begin feeding it through the light base. Insert the plug into the top portion of the water bottle and out through the bottom hole you created in the base. Feed it all of the way through until the bulb portion sits snugly inside the pineapple base. Don't forget to screw in your light bulb!

Step 9: Create your pineapple spikes.

At the top of your water bottle, take your spoon handles and create a spiky top, just like you would see on a pineapple. No need for perfection here! I used a combination of hot glue and tape to adhere it.

NOTE: For safety reasons, ensure this spiky piece does not touch your light bulb. You don't want the ends of the spoons to become too hot when lit.

Voila! My playful pineapple light sitting on my family room side table. It adds such a fun pop of color to our room and I've received so many compliments on it already. Your guests won't believe you made it from a bunch of plastic spoons!

Daytime vs. Nighttime - Lit-up!

Suggested materials:
  • Plastic Spoons   (CVS)
  • Large Water Bottle (Smart Water)   (CVS)
  • Rustoleum Spray Paint   (Amazon)
See all materials
Frequently asked questions
Have a question about this project?
3 of 10 questions
  • Lynn Chrysogelos Lynn Chrysogelos on Jan 28, 2018
    Is the lighting to hoy for plastic. What kind of light bulb ? Night light

  • Andrea Lee Morgan Andrea Lee Morgan on Oct 11, 2019

    This item does not look like a pineapple. Wouldn't you call it an artichoke?

  • Shevelle Collins Shevelle Collins on Feb 22, 2020

    Would love to do this with my Grand daughters but the Lighting part seems dangerous with plastic could catch fire don't you think?

Join the conversation
2 of 35 comments
  • Greg Kovacich Greg Kovacich on Jan 27, 2018
    If you use even a low watt incandescent bulb it will soften the hot glue and everything will lose it's shape in a very short period of time. Make sure you use LED bulbs!

  • LaNita Young LaNita Young on Jan 26, 2019

    Me and my grandson have wanted to try this when we saw the project in another site. It looks like fun, and I believe if we follow directions we should have great results. It said to use a Chandler bulb so maybe it won't get very hot.