Vintage Window Makeover Using A Poster

3 Materials
5 Minutes
We just installed a vintage door in our bedroom and I knew this room needed a little something else to go with it. I had an old window laying around and just needed to find some artwork to go in it. I ordered this cow butcher poster (affiliate link) here and some elmer's spray adhesive (affiliate link) and had this DIY finished in less than 5 minutes!
Step 1: Clean the inside of your window really good
Step 2: Do this step outside as the spray adhesive is STICKY! Spray the front of your poster with a thick coat. You can't do this in several coats because you don't want the glue to dry before you adhere your poster to your window. I sprayed one thick coat up and down the front of my poster.
Step 3: Lay your poster front facing down into your window frame. If your poster doesn't fit in your window exactly, and you need to center it, measure before you spray your poster, and mark where the top and bottom of your poster should lay with an erasable marker.
That's it! I used sawtooth hangars to hang this window. If you want to change your print out, just pull the poster out and clean the adhesive off and start over!
Suggested materials:
  • Old Window
  • Poster
  • Adhesive Spray
Two Paws Farmhouse | Homesteading
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
Join the conversation
2 of 5 comments