Home Office Printer Station From an Old Dresser

5 Materials
2 Hours

Disclosure: This post was compensated and written in collaboration with Blue Ridge Tools. All opinions are my own. I found this dresser for FREE as part of a package deal. We were in the process of creating a his and her office space in a small area of my shop. I decided to repurpose this old, outdated dresser to use as a printing station for our new office space.

There were a couple of drawers missing and the top was not in the best shape. But, I NEVER turn down a piece of free furniture. I knew the Hubs and I could come up with a plan to save the poor soul.


After discussing it, we decided that adding wood would be a great option. Not only would it make it look better, but it would make the dresser a bit more sturdier. Wood would be added to the inside where the drawers were missing to give it a farmhouse, rustic feel.  

We found these shiplap pieces at our local salvage store. I think we paid around $20.00 and we even had a few extra pieces left that could be used for another diy project. 

I went through my paint stash to determine what color I wanted the outside of the dresser to be. Our plan was to give our space a farmhouse feel. I also knew that I would be staining the shiplap. Therefore, I chose Dixie Belle’s Hurricane Gray. 

Step 1:The Hubs got busy cutting the shiplap to the correct size. He measured the inside of the cabinet to determine the length and width he would need before he made his cuts. He is using my pink tape measure that came in my Blue Ridge Pink Tool Kit! This kit has everything you need as a DIYer!  

This is the Blue Ridge home tool kit.

The shiplap was cut into six pieces. Six longer pieces for the bottom and six smaller pieces for each side.

After all the pieces were cut to size, I sanded them lightly with a piece of 220-grit sandpaper.

Step 2:The Hubs added two thin strips of wood he cut from a 1x4 to add to each side to give the shiplap something to attach to. The Blue Ridge Battery Operated Screwdriver worked like a charm for this part of the project. 

Then, each piece of shiplap was nailed into place starting with the bottom and finishing with the sides. We used the pink hammer that was included in my Blue Ridge Tool Kit.

Here is the bottom of the dresser after the shiplap was added. Two smaller pieces were cut from a scrap piece of shiplap to add as trim for the outside.

Step 3:Once the shiplap was attached, it was time to stain. I chose Minwax’s Special Walnut. One coat was applied making sure to wipe off any excess stain with an old cloth. I allowed the stain to dry overnight. (Note: It might be easier to stain the shiplap before adding it to the cabinet!)

Step 4:The next day, it was time to paint. The outside of the piece, the top and the drawers were cleaned with a Lysol cloth. I then used painters tape and taped off the stained shiplap where I did not want paint.

I applied one coat of paint to the drawer fronts and the piece itself.

After about 2 hours of drying time, I applied the second and final coat of paint. I allowed the piece to dry overnight.  

Step 5: I then applied one coat of Dixie Belle’s Spray Wax to the outside of the piece. It’s just a wipe on, wipe off process.  

Step 6: I found four farmhouse pulls in my stash that I knew would be perfect for this piece. The hardware was attached using the rechargeable Blue Ridge Screwdriver. It is smaller and fits into those smaller areas perfectly! 

This is the perfect addition to our office space. It holds the printer, while neatly storing paper, ink cartridges and still has space for me to add a bit of decor!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Lucie - Oh my sander
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
Join the conversation
2 of 8 comments