DIY Shutter Arbor
Back in September of last year I got a message from a neighbor of mine telling me about the local salvage yard giving away a bunch of their mismatched shutters. I was sure that by the time I would be able to get there that there would be none left, but I was pleasantly surprised and managed to load up about 15 shutters.
I’ve been working on shutter projects ever since and I still have a few left.
All the supplies needed are based on shutters 18″ in width. You may have to adjust your lengths if you have wider or narrower shutters.
- 2 matching shutters (18″ wide)
- 3 2×4’s or pallet side pieces, cut 2, 48″, and 2, 18″ (the width of the shutter)
- 4, 8 ft 2×3’s or 2×4’s
- top arbor pieces, you can use 1×6’s, 1×4’s or pallet wood pieces … cut 6 pieces about 38″
I’m using regular lumber because that’s what I had on hand, but you may want to consider using treated wood to last longer.
Lay out the 4, 8 ft 2×3’s next to the shutter. Leave about a foot of the 2×3 above the shutter.
Start screwing in the deck screws especially where there are crossbars on the shutter.
Stand the shutter up and finish screwing.
In the area where you left the extra foot, add the 18″ piece of pallet wood or 2×4. Use more deck screws to attach.
It was at this point when I realized that this thing was getting kind of heavy. It was much easier to drag the arbor outside now and assemble it in place rather than trying to move it once it was constructed.
I chopped the bottom corners off of the 48″ pallet wood sides and screwed it to the 2×3’s.
For the top of the arbor I’m using a few pieces of old decking. Cut 6 pieces 38″ in length.
You could cut the ends with just a straight angled cut, but if you like a fancier edge, cut a pattern from stiff paper and transfer it to the 1×6 ends. Cut with a jigsaw or scroll saw.
Mark where those top arbor pieces hit the 2×4’s.
Cut out a notch about an inch in depth.
If your first board fits, you can use that as a pattern to mark the remaining boards.
Use even more deck screws to attach these final arbor pieces.
Sink the posts in dirt or cement for added stability.
Because I had almost all of the supplies already on hand, this project only cost me about $5. Not bad for a dramatic change to my garden.
Visit me over at ScavengerChic for 19 more shutter projects and more pics of this project.
Enjoyed the project?
Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Want more details about this and other DIY projects? Check out my blog post!
Published November 17th, 2017 10:24 AM
Frequently asked questions
Have a question about this project?
3 of 6 questions
Join the conversation
2 of 103 comments
Love this idea! Question-how did you secure it to the ground so it wouldn't tip over? I've been looking for something like this to do to a patio project I'm going to start this fall and would love to incorporate this idea, but it does get windy in downstate IL!