How To Edge In Landscape The Lazy Girl Way

• - Stone Pavers
• -Twine or Line
• - Stakes
• - Shovel
• - T Square 
• -Spray Paint
• -Mulch

The first part of the plan is to decide where you want stones or pavers. We chose to add them to the edge of all of the front yard's landscape. Edging stones really help to make everything look cleaner & not so overrun. As you can see I attempted this project last year with that tree & ended up with a wonky circle & not much else, but in my defense, I was 38 ½ weeks pregnant. Don't worry though, it will get a makeover too!

To figure out how many stones you will need to measure the length of the area you want to be edged. Next, pick your stone & divide its length by your total area length. That will give you a rough estimate of many stones you will need to cover your area. Don't forget to double the stone amount if you plan on doing two layers as we did. 

There are multiple tools to use to accomplish this but I used stakes from Eli’s bounce house & twine, this is the lazy girl way after all. Mark along the edge of where you want your paver fronts to be. This is a great way to visualize your plan & make sure you are happy with how it will look.

It's definitely easier to weed out your landscape bed before you lay down the stones, so now is the perfect time to get that done. Kinda cool that I am mowing the lawn & weeding at the same time right? Well technically our Worx LandRoid is mowing but still, 😉 My favorite thing about the LandRoid is that I can be doing other projects while also getting the lawn cut at the same time!

You want the pavers to be inset into the ground about 1 ½” to 2”. The best way to do this is with a square shovel. Dig straight down into the back of the paver line first then move to the front of the line, dig in & lift up. This will help the cut out portion come up in pieces instead of a big mess of dirt.

After you remove the patch of grass, keep all the loose dirt, you will use it as fill dirt for placing the stones. Pat down the dirt so it is compact & even, then start placing the stones along the border. 

This part is super important, you want to make sure when you are installing the stones that they are all level. A large bubble level will make this easier, just add or take away fill dirt under each stone as needed. Do you see my two other workers back there? Yepp one is actually working (Worx Landroid) & the other (my husband) is watching it mow the lawn, it's hard to find good help these days 😉 Justin is actually teaching the LandRoid zones of the yard so that we can easily set how much time we want it to spend cutting each zone. This is an amazing feature that allows us to keep our front & back yard in tip-top shape.

The easiest way to ensure all your stones are in a straight line is to use a T square. You can spray paint along that line or just keep it in place as you add the stones.

After the first layer is laid down it's time to start the second layer. This layer will go much quicker, I like the offset look of the stones but it's completely up to you.

Use mulch or stone to fill the newly edged landscape area. The easiest way to do this is to dump bags into multiple piles all around the area. Then, use a rake to distribute the mulch piles evenly. 

Finally, it’s time to cut the grass around the outside edge of the pavers.

The Worx Landroid makes this part super simple because it does all the edging for us. It is even equipped with sensors that let it know where the pavers are so it doesn't run into them!

So much better right?! It feels so good to have this project behind me & now I don't have to rush inside in shame of my front yard. This project was definitely done the lazy girl way & there are probably more technical ways to complete it but I am super happy with how it turned out! The best part is thanks to our Worx Landroid I can go inside & relax with a bubble bath while it finishes up the lawn!

Want to see more of my DIY outdoor projects?! Head this way!